EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cavitation Observation and Noise Characteristics in Rectangular Throttling Groove Spool

Jian Zhang, Jifeng Fu, Xinyang Zhang, Tao Zhang, Yuhang Wang

Processes · 22.09.2023 · 11 (10) · 2814

DOI: 10.3390/pr11102814 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 22.09.2023. Verfasst von Jian Zhang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program, Aviation Science Foundation, National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

A hydraulic cavitation platform was developed in order to examine the occurrence of cavitation in the rectangular throttling groove spool and its correlation with noise characteristics. The test valve is constructed using PMMA material, which possesses excellent transparency. This transparency enables direct visual examination of cavitation occurring at the throttle slot. Additionally, high-speed photography is employed to observe the flow characteristics of the valve port, facilitating the analysis of cavitation morphology changes. Furthermore, a noise meter is utilized to measure and record the noise level and its corresponding spectrum. The flow field and flow phenomena at the rectangular throttling groove spool were studied using high-speed photography, noise spectrum analysis, and other methods. It is discovered that back pressure has the greatest influence on cavitation and flow separation, followed by the influence of intake pressure on cavitation morphology and noise. As the back pressure lowers, the cavitation morphology changes from flaky to cloudy, and the cavitation intensity, distribution area, and noise level increase. Background noise and cavitation noise have distinct frequency differences; cavitation noise in the rectangular throttling groove spool is high-frequency noise, with a frequency of more than 8 kHz, and the higher the frequency, the greater the difference in noise value. The magnitude of the alterations in noise intensity is minimal. The noise values exhibit slight variations of 2.3 dB, 4 dB, and 4.3 dB under varying back pressure circumstances of 3 MPa, 4 MPa, and 5 MPa inlet pressure, respectively. It is recommended to use the frequency of cavitation noise to detect the cavitation state and monitor the cavitation process. In the low-frequency region, the cavitation noise in the rectangular throttle groove valve core is not significantly different. Once the center frequency surpasses 3.15 kHz, a discernible distinction emerges, with the magnitude of the discrepancy in noise value increasing as the frequency rises. In other words, the cavitation cloud does not pulsate at one single frequency, but rather in a range of relatively high frequencies (more than 3.15 kHz).

Förderung

  • National Key R&D Program
  • Aviation Science Foundation
  • National Natural Science Foundation of China
  • Heilongjiang Province Key R&D Program
  • Harbin Manufacturing Science and Technology Innovation Talent
  • Central Universities

Zitieren

APA

Zhang, J., Fu, J., Zhang, X., Zhang, T., & Wang, Y. (2023). Cavitation Observation and Noise Characteristics in Rectangular Throttling Groove Spool. Processes, 11(10), 2814. https://doi.org/10.3390/pr11102814

Vancouver

Zhang J, Fu J, Zhang X, Zhang T, Wang Y. Cavitation Observation and Noise Characteristics in Rectangular Throttling Groove Spool. Processes. 2023;11(10):2814. doi:10.3390/pr11102814

BibTeX
@article{Zhang2023,
  author = {Zhang, Jian and Fu, Jifeng and Zhang, Xinyang and Zhang, Tao and Wang, Yuhang},
  title = {Cavitation Observation and Noise Characteristics in Rectangular Throttling Groove Spool},
  journal = {Processes},
  year = {2023},
  volume = {11},
  number = {10},
  pages = {2814},
  doi = {10.3390/pr11102814}
}
Kostenlos starten →