EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Improving the Energy Efficiency of the Production of Pipes Welded with High-Frequency Induction

Zbigniew Techmański, Jacek Stępień, Tomasz Garstka, Paweł Wieczorek, Grzegorz Golański, Jan Supernak

Processes · 20.09.2023 · 11 (9) · 2798

DOI: 10.3390/pr11092798 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 20.09.2023. Verfasst von Zbigniew Techmański und 5 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Center for Research and Development (NCBR).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This article presents the technical aspects that may reduce electric power consumption during the welding of pipes with the high-frequency induction (HFI) method. Experiments were carried out at Huta Łabędy S.A. Steelworks, during the test production of 323.9 × 5.6 mm pipes of P235GH steel grade. Two sets of HFI heating system settings were studied: with a variable squeeze force of the heated edges and a variable position of the inductor in relation to the welding point. It was proven that the temperature at the welding point increased due to the stronger squeeze of the heated edges, which reduced the electric power consumption. Reducing the distance of the inductor relative to the welding point had the same effect. By optimizing the squeeze force and the position of the inductor, energy consumption was reduced by about 5.5%. Microstructural studies of the welds did not show any adverse effects of the optimization.

Förderung

  • National Center for Research and Development (NCBR)

Zitieren

APA

Techmański, Z., Stępień, J., Garstka, T., Wieczorek, P., Golański, G., & Supernak, J. (2023). Improving the Energy Efficiency of the Production of Pipes Welded with High-Frequency Induction. Processes, 11(9), 2798. https://doi.org/10.3390/pr11092798

Vancouver

Techmański Z, Stępień J, Garstka T, Wieczorek P, Golański G, Supernak J. Improving the Energy Efficiency of the Production of Pipes Welded with High-Frequency Induction. Processes. 2023;11(9):2798. doi:10.3390/pr11092798

BibTeX
@article{Techmaski2023,
  author = {Techmański, Zbigniew and Stępień, Jacek and Garstka, Tomasz and Wieczorek, Paweł and Golański, Grzegorz and Supernak, Jan},
  title = {Improving the Energy Efficiency of the Production of Pipes Welded with High-Frequency Induction},
  journal = {Processes},
  year = {2023},
  volume = {11},
  number = {9},
  pages = {2798},
  doi = {10.3390/pr11092798}
}
Kostenlos starten →