EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Adhesion Strength of Semi-Clathrate Hydrate to Different Solid Surfaces

Zhen Xu, Lei Zheng, Zhen Dong, Aixian Liu, Yiwei Wang, Qiang Sun, Jianyi Chen, Xuqiang Guo

Processes · 12.09.2023 · 11 (9) · 2720

DOI: 10.3390/pr11092720 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 12.09.2023. Verfasst von Zhen Xu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Research Funds for Universities of Xinjiang Uygur Autonomous Region, National Natural Science Foundation of China, Distinguished Youth Foundation of the Tianshan Program of Xinjiang Uygur Autonomous Region.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The adhesion between a hydrate and a pipe wall is the main cause of hydrate deposition and blockage. In this study, the adhesion strength of semi-clathrate hydrate (tetrabutylammonium bromide hydrate) to four kinds of solid surfaces (E235B carbon steel, E355CC low alloy steel, SUS304 stainless steel, and polytetrafluoroethylene) was measured. This investigation reveals that the adhesion strength of the hydrate to a solid surface is negatively correlated with the wettability of the solid surface, which suggests that hydrophobic materials effectively reduced the hydrate adhesion to the pipe wall. The surface roughness showed different effects on the adhesion of the hydrate to hydrophilic or hydrophobic surfaces. To be specific, when the surface roughness increased from 3.2 µm to 12.5 µm, the hydrate adhesion strength to the hydrophilic surface of SUS304 increased by 123.6%, whereas the hydrate adhesion strength to the hydrophobic surface of polytetrafluoroethylene only increased by 21.5%. This study shows that low wettability and low surface roughness effectively reduce the critical rate required to remove hydrate deposition, which achieves the self-removal of hydrates. At the same time, it was found that the adhesion strength of the hydrate to surfaces increases with increasing subcooling. This investigation holds significant theoretical implications for designing self-cleaning surfaces for oil and gas pipes.

Förderung

  • Research Funds for Universities of Xinjiang Uygur Autonomous Region
  • National Natural Science Foundation of China
  • Distinguished Youth Foundation of the Tianshan Program of Xinjiang Uygur Autonomous Region

Zitieren

APA

Xu, Z., Zheng, L., Dong, Z., Liu, A., Wang, Y., Sun, Q., Chen, J., & Guo, X. (2023). The Adhesion Strength of Semi-Clathrate Hydrate to Different Solid Surfaces. Processes, 11(9), 2720. https://doi.org/10.3390/pr11092720

Vancouver

Xu Z, Zheng L, Dong Z, Liu A, Wang Y, Sun Q, et al. The Adhesion Strength of Semi-Clathrate Hydrate to Different Solid Surfaces. Processes. 2023;11(9):2720. doi:10.3390/pr11092720

BibTeX
@article{Xu2023,
  author = {Xu, Zhen and Zheng, Lei and Dong, Zhen and Liu, Aixian and Wang, Yiwei and Sun, Qiang and Chen, Jianyi and Guo, Xuqiang},
  title = {The Adhesion Strength of Semi-Clathrate Hydrate to Different Solid Surfaces},
  journal = {Processes},
  year = {2023},
  volume = {11},
  number = {9},
  pages = {2720},
  doi = {10.3390/pr11092720}
}
Kostenlos starten →