Digital Twin Implementation for Manufacturing of Adjuvants
Processes · 03.06.2023 · 11 (6) · 1717
DOI: 10.3390/pr11061717 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 03.06.2023. Verfasst von Poonam Phalak und 10 weiteren Autor:innen. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: GlaxoSmithKline Biologicals SA, Siemens.
Abstract (Originalsprache)
Pharmaceutical manufacturing processes are moving towards automation and real-time process monitoring with the help of process analytical technologies (PATs) and predictive process models representing the real system. In this paper, we present a digital twin developed for an adjuvant manufacturing process involving a microfluidic formation of lipid particles. The twin uses a hybrid model for estimating the current state of the process and predicting system behavior in real time. The twin is used to control the adjuvant particle size, a critical quality attribute, by varying process parameters such as the temperature and inlet flow rates. We describe steps in the design and implementation of the twin, starting from the conception of the mechanistic model, up to the generation of its surrogate model used as state estimator, PATs and the setup of the information technology—Operational technology architecture. We demonstrate the performance of the twin by introducing different disturbances in the process and comparing the effect on the product critical quality attributes with and without the control of the digital twin. Finally, we showcase the digital twin implementation for the process in good manufacturing practice, through an engineering run, which demonstrated the robustness of the process when controlled by the digital twin.
Förderung
- GlaxoSmithKline Biologicals SA
- Siemens
Zitieren
APA
Phalak, P., Tomba, E., Jehoulet, P., Kapitan-Gnimdu, A., Soladana, P. M., Vagaggini, L., Brochier, M., Stevens, B., Peel, T., Strodiot, L., & Dessoy, S. (2023). Digital Twin Implementation for Manufacturing of Adjuvants. Processes, 11(6), 1717. https://doi.org/10.3390/pr11061717
Vancouver
Phalak P, Tomba E, Jehoulet P, Kapitan-Gnimdu A, Soladana PM, Vagaggini L, et al. Digital Twin Implementation for Manufacturing of Adjuvants. Processes. 2023;11(6):1717. doi:10.3390/pr11061717
BibTeX
@article{Phalak2023,
author = {Phalak, Poonam and Tomba, Emanuele and Jehoulet, Philippe and Kapitan-Gnimdu, André and Soladana, Pablo Martin and Vagaggini, Loredana and Brochier, Maxime and Stevens, Ben and Peel, Thomas and Strodiot, Laurent and Dessoy, Sandrine},
title = {Digital Twin Implementation for Manufacturing of Adjuvants},
journal = {Processes},
year = {2023},
volume = {11},
number = {6},
pages = {1717},
doi = {10.3390/pr11061717}
}
EUVIMED