Thermoelectric Generator Design and Characterization for Industrial Pipe Waste Heat Recovery
Processes · 03.06.2023 · 11 (6) · 1714
DOI: 10.3390/pr11061714 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 03.06.2023. Verfasst von Di Xiao und 10 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Zhejiang Provincial Key R&D Program, Zhejiang Provincial Natural Science Foundation of China.
Abstract (Originalsprache)
Thermoelectric technology is an effective strategy to convert low–grade waste heat to electrical energy directly. Thermoelectric generators (TEGs) have been extensively studied in various waste heat scenarios, such as vehicle exhaust, metal casting processes and more. However, industrial pipelines also possess high levels of heat and wide distribution, yet there is limited research on TEGs for use in these pipes. The challenge in designing a TEG lies in the heat collector, which is complicated by the distinct structural differences between pipe and plate–shaped TEMs. Ultimately, we propose an arch bridge–shaped heat collector for the pipe to recover wasted thermal energy. The effects of some key factors, such as topology of TEMs, heat source temperature, cooling water temperature and velocity, on the generating performance are studied. The TEG achieved a temperature difference of 65.98 °C across the two ends of the TEM, resulting in an output power of 17.89 W at an open–circuit voltage of 133.35 V. This provides evidence that the designed heat collector is a feasible solution for recovering waste heat from pipes using TEG technology. This work provides reliable experimental data and efficient design for the application of TEGs in industrial pipes.
Förderung
- National Natural Science Foundation of China
- Zhejiang Provincial Key R&D Program
- Zhejiang Provincial Natural Science Foundation of China
- Youth Innovation Promotion Association CAS
- Zhejiang Provincial High–level Talent Special Support Plan
- Ningbo Key Research and Development Plan
Zitieren
APA
Xiao, D., Sun, P., Wu, J., Zhang, Y., Wu, J., Liu, G., Hu, H., Hu, J., Tan, X., He, S., & Jiang, J. (2023). Thermoelectric Generator Design and Characterization for Industrial Pipe Waste Heat Recovery. Processes, 11(6), 1714. https://doi.org/10.3390/pr11061714
Vancouver
Xiao D, Sun P, Wu J, Zhang Y, Wu J, Liu G, et al. Thermoelectric Generator Design and Characterization for Industrial Pipe Waste Heat Recovery. Processes. 2023;11(6):1714. doi:10.3390/pr11061714
BibTeX
@article{Xiao2023,
author = {Xiao, Di and Sun, Peng and Wu, Jianlin and Zhang, Yin and Wu, Jiehua and Liu, Guoqiang and Hu, Haoyang and Hu, Jun and Tan, Xiaojian and He, Shi and Jiang, Jun},
title = {Thermoelectric Generator Design and Characterization for Industrial Pipe Waste Heat Recovery},
journal = {Processes},
year = {2023},
volume = {11},
number = {6},
pages = {1714},
doi = {10.3390/pr11061714}
}
EUVIMED