EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Application of Copper Oxide Nanofluid and Phase Change Material on the Performance of Hybrid Photovoltaic–Thermal (PVT) System

Awaneendra Kumar Tiwari, Kalyan Chatterjee, Vinay Kumar Deolia

Processes · 24.05.2023 · 11 (6) · 1602

DOI: 10.3390/pr11061602 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 24.05.2023. Verfasst von Awaneendra Kumar Tiwari und 2 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of the study is to investigate the thermal, electrical, and exergetic performance of a hybrid photovoltaic–thermal (PVT) system under the influence of copper oxide (CuO) nanofluid and phase change material (Vaseline (petroleum jelly)) as a heat storage medium. A mathematical model was developed with the help of various energy-balance equations over the layers of the hybrid system. The performance evaluation of the PVT system was performed using pure water, CuO-water nanofluid (0.2 and 0.4% weight fractions), and CuO-water nanofluid 0.4% weight fraction with Vaseline as a phase change material. The results of the overall analysis show that the performance of the PVT system is better using CuO-water nanofluid (0.4% wt. fraction) with PCM as compared to the water-cooled PVT system and CuO-water nanofluid. The results obtained from the study show indicate that the cell temperature of PVT was reduced by 4.45% using nanofluid cooling with PCM compared to a water-cooled PVT system. Moreover, the thermal, electrical, and overall efficiencies improved by 6.9%, 4.85%, and 7.24%, respectively, using 0.4% wt. fraction of CuO-water nanofluid with PCM as compared to PVT water-cooled systems. The performance of the PVT system was also investigated by changing the mass flow rate (MFR). The increase in mass flow rate (MFR) from 0.05 kg/s to 0.2 kg/s tends to enhance the electrical and overall efficiencies from 12.89% to 16.32% and 67.67% to 76.34%, respectively, using 0.4% wt. fraction of CuO-PCM as fluid.

Zitieren

APA

Tiwari, A. K., Chatterjee, K., & Deolia, V. K. (2023). Application of Copper Oxide Nanofluid and Phase Change Material on the Performance of Hybrid Photovoltaic–Thermal (PVT) System. Processes, 11(6), 1602. https://doi.org/10.3390/pr11061602

Vancouver

Tiwari AK, Chatterjee K, Deolia VK. Application of Copper Oxide Nanofluid and Phase Change Material on the Performance of Hybrid Photovoltaic–Thermal (PVT) System. Processes. 2023;11(6):1602. doi:10.3390/pr11061602

BibTeX
@article{Tiwari2023,
  author = {Tiwari, Awaneendra Kumar and Chatterjee, Kalyan and Deolia, Vinay Kumar},
  title = {Application of Copper Oxide Nanofluid and Phase Change Material on the Performance of Hybrid Photovoltaic–Thermal (PVT) System},
  journal = {Processes},
  year = {2023},
  volume = {11},
  number = {6},
  pages = {1602},
  doi = {10.3390/pr11061602}
}
Kostenlos starten →