Modeling Strategies for Crude Oil-Induced Fouling in Heat Exchangers: A Review
Processes · 29.03.2023 · 11 (4) · 1036
DOI: 10.3390/pr11041036 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 29.03.2023. Verfasst von Obaid ur Rehman und 5 weiteren Autor:innen. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 100 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Yayasan UTP.
Abstract (Originalsprache)
Semi-empirical fouling models have proven more effective in predicting the fouling behavior of crude oils in heat exchangers. These models have aided refineries in optimizing operating conditions to minimize or eliminate fouling in preheat exchangers. Despite their complexity, the models continue to improve in approximating real behavior by taking into account previously neglected aspects. This paper summarizes these findings from various studies along with highlighting different factors which were considered to enhance the predictability of the models. A critical analysis is presented to emphasize that activation energy in the deposition term varies depending on the physical processes involved and may not conform to the precise definition of activation energy. Two primary modeling approaches for crude oil fouling have emerged, i.e., deterministic and threshold models. Threshold models have gained more attention due to their fewer adjustable parameters. The stability or compatibility of crude oils has a substantial impact on asphaltene deposition, which is a major contributor to fouling. However, incorporating this factor into fouling models has received little attention. The inclusion of parameters for inorganic fraction and ageing has increased predictability by accurately estimating the fouling thickness. The use of CFD to analyze fouling mechanisms is promising, particularly for complex geometries. The dynamic and moving boundary modeling approach has potential to broaden the applicability of fouling models.
Förderung
- Yayasan UTP
Zitieren
APA
Rehman, O. U., Ramasamy, M. G., Rozali, N. E. M., Mahadzir, S., Ghumman, A. S. M., & Qureshi, A. H. (2023). Modeling Strategies for Crude Oil-Induced Fouling in Heat Exchangers: A Review. Processes, 11(4), 1036. https://doi.org/10.3390/pr11041036
Vancouver
Rehman OU, Ramasamy MG, Rozali NEM, Mahadzir S, Ghumman ASM, Qureshi AH. Modeling Strategies for Crude Oil-Induced Fouling in Heat Exchangers: A Review. Processes. 2023;11(4):1036. doi:10.3390/pr11041036
BibTeX
@article{Rehman2023,
author = {Rehman, Obaid ur and Ramasamy, Marappa Gounder and Rozali, Nor Erniza Mohammad and Mahadzir, Shuhaimi and Ghumman, Ali Shaan Manzoor and Qureshi, Abdul Hannan},
title = {Modeling Strategies for Crude Oil-Induced Fouling in Heat Exchangers: A Review},
journal = {Processes},
year = {2023},
volume = {11},
number = {4},
pages = {1036},
doi = {10.3390/pr11041036}
}
EUVIMED