Experimental and Numerical Investigation on Slamming Mechanism of a Mooring Column-Stabilised Semi-Submersible
Processes · 28.02.2023 · 11 (3) · 725
DOI: 10.3390/pr11030725 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 28.02.2023. Verfasst von Zhi Yao und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, General Project of Guangdong Province Department of Natural Resources to Promote High-Quality Economic Development, Innovation Group Project of Southern Marine Science and Engineering Guangdong Laboratory (Zhuhai).
Abstract (Originalsprache)
Semi-submersible offshore platforms play a vital role in deep-sea energy exploitation. However, the vast waves threaten the platform’s operation, usually leading to severe consequences. It is essential to study the wave-slamming mechanism of offshore platforms under extreme wave conditions. Existing research usually simplifies the offshore platform slamming problem. This paper establishes a model of a semi-submersible platform and a flexible mooring system in a numerical pool by means of the computational fluid dynamics (CFD) method. The distribution and the sensitivity of the slamming load on columns and deck in waves were investigated, and the model was verified through the basin test. Firstly, based on the Reynolds-averaged Navier–Stokes model, this study considers the volume-of-fluid method to track the free liquid level. After the column and floating body grid are locally refined, the slamming load under extreme regular wave impact is measured by measuring points on the column and deck. Then, the slamming experiment of the semi-submersible was carried out in the basin. The experiment model with a scale ratio of 1:100 was established to investigate the platform’s motion and slamming loads under extreme regular and irregular waves. The findings indicate that the slamming load at the junction of the column and deck significantly increased, exhibiting a ‘double-peak’ phenomenon at the middle of the column. The maximum pressure of slamming at the top of the column demonstrated an inverted U-shaped distribution, with negative pressure occurring after the peak value, indicating a pronounced oscillation effect.
Förderung
- National Natural Science Foundation of China
- General Project of Guangdong Province Department of Natural Resources to Promote High-Quality Economic Development
- Innovation Group Project of Southern Marine Science and Engineering Guangdong Laboratory (Zhuhai)
Zitieren
APA
Yao, Z., Huo, F., Zhu, Y., Tang, C., Jia, K., Li, D., & Ma, Y. (2023). Experimental and Numerical Investigation on Slamming Mechanism of a Mooring Column-Stabilised Semi-Submersible. Processes, 11(3), 725. https://doi.org/10.3390/pr11030725
Vancouver
Yao Z, Huo F, Zhu Y, Tang C, Jia K, Li D, et al. Experimental and Numerical Investigation on Slamming Mechanism of a Mooring Column-Stabilised Semi-Submersible. Processes. 2023;11(3):725. doi:10.3390/pr11030725
BibTeX
@article{Yao2023,
author = {Yao, Zhi and Huo, Fali and Zhu, Yuanyao and Tang, Chenxuan and Jia, Kunqiao and Li, Dong and Ma, Yong},
title = {Experimental and Numerical Investigation on Slamming Mechanism of a Mooring Column-Stabilised Semi-Submersible},
journal = {Processes},
year = {2023},
volume = {11},
number = {3},
pages = {725},
doi = {10.3390/pr11030725}
}
EUVIMED