EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fracture Parameters Optimization and Field Application in Low-Permeability Sandstone Reservoirs under Fracturing Flooding Conditions

Cong Lu, Li Ma, Jianchun Guo, Lin Zhao, Shiqian Xu, Bugao Chen, Yulong Zhou, Haoren Yuan, Zhibin Tang

Processes · 16.01.2023 · 11 (1) · 285

DOI: 10.3390/pr11010285 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 16.01.2023. Verfasst von Cong Lu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 21-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Natural Science Foundation of China Joint Fund Project Key Support Project, CNOOC Beijing Research Institute.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To solve engineering problems in the production process after fracturing and flooding of low-permeability sandstone reservoirs, such as rapid water-cut rise and low water flooding efficiency, a method for optimizing the fracture parameters of low-permeability sandstone reservoirs under fracturing flooding conditions was proposed. A rock property test experiment was first carried out, the fracturing coefficient was defined, and an evaluation method for the brittleness index of low-permeability sandstone was established to optimize the perforation location of the fracturing reservoir. A productivity numerical model for the two-phase flow of oil–water in matrix–fracture media was established to optimize the fracture morphology under fracturing flooding conditions. The results showed that the quartz content, Young’s modulus, and peak stress mainly affected the fracturing coefficient of rock and are the key indicators for evaluating the brittleness of low-permeability sandstone reservoirs. For production wells in the direction of minimum horizontal principal stress, the swept area of water flooding should be expanded, fracture length should be optimized to 90 m, and fracture conductivity should be 20 D·cm. For fracturing production wells in the direction of maximum horizontal principal stress, the advancing speed of the water injection front should be slowed down to reduce the risk of water channeling in injection-production wells. The optimized fracture length was 80 m, and the fracture conductivity was 25 D·cm. The application of these findings can markedly improve oil production and provide a reference for optimizing the fracture parameters of low-permeability sandstone reservoirs under fracturing flooding conditions.

Förderung

  • National Natural Science Foundation of China
  • National Natural Science Foundation of China Joint Fund Project Key Support Project
  • CNOOC Beijing Research Institute

Zitieren

APA

Lu, C., Ma, L., Guo, J., Zhao, L., Xu, S., Chen, B., Zhou, Y., Yuan, H., & Tang, Z. (2023). Fracture Parameters Optimization and Field Application in Low-Permeability Sandstone Reservoirs under Fracturing Flooding Conditions. Processes, 11(1), 285. https://doi.org/10.3390/pr11010285

Vancouver

Lu C, Ma L, Guo J, Zhao L, Xu S, Chen B, et al. Fracture Parameters Optimization and Field Application in Low-Permeability Sandstone Reservoirs under Fracturing Flooding Conditions. Processes. 2023;11(1):285. doi:10.3390/pr11010285

BibTeX
@article{Lu2023,
  author = {Lu, Cong and Ma, Li and Guo, Jianchun and Zhao, Lin and Xu, Shiqian and Chen, Bugao and Zhou, Yulong and Yuan, Haoren and Tang, Zhibin},
  title = {Fracture Parameters Optimization and Field Application in Low-Permeability Sandstone Reservoirs under Fracturing Flooding Conditions},
  journal = {Processes},
  year = {2023},
  volume = {11},
  number = {1},
  pages = {285},
  doi = {10.3390/pr11010285}
}
Kostenlos starten →