Mesh Stiffness and Nonlinear Dynamic Model for a Gear Drive with Revolute Pair Clearance
Processes · 10.01.2023 · 11 (1) · 230
DOI: 10.3390/pr11010230 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 10.01.2023. Verfasst von Juan Huang und 5 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, the Key Research and Development Program of Hunan Province, the Key Research and Development Program of Guangdong Province.
Abstract (Originalsprache)
Bearings and other revolute pairs in gear drives will form clearances due to wear after working for a long time, which will aggravate the vibration and noise of the gear. Therefore, taking the gear drives with revolute pair clearance as the research object, the calculation formulas of the backlash and contact ratio is derived, and the time-varying mesh stiffness model considering the clearance is presented in this work. Then, a nonlinear dynamic model for the gear drives with revolute pair clearance is proposed by combining the backlash, contact ratio and the time-varying mesh stiffness. The effects of the clearance on the meshing stiffness, load sharing factor and nonlinear behavior are investigated. Results indicate that the revolute pair clearance weakens the meshing stiffness and increases working hours in single teeth contact area, thereby increasing the risk of premature failure of the gear drive. In addition, the revolute pair clearance has negligible effect on the nonlinear behavior of gear pair in low-speed running, but it can obviously change the bifurcation behavior and aggravate the vibration of the gear drive.
Förderung
- National Natural Science Foundation of China
- the Key Research and Development Program of Hunan Province
- the Key Research and Development Program of Guangdong Province
- Natural Science Foundation of Hunan Province
- Excellent Youth Program of Hunan Education Department
Zitieren
APA
Huang, J., Hu, B., Sun, S., Xiao, M., Peng, C., & Wang, H. (2023). Mesh Stiffness and Nonlinear Dynamic Model for a Gear Drive with Revolute Pair Clearance. Processes, 11(1), 230. https://doi.org/10.3390/pr11010230
Vancouver
Huang J, Hu B, Sun S, Xiao M, Peng C, Wang H. Mesh Stiffness and Nonlinear Dynamic Model for a Gear Drive with Revolute Pair Clearance. Processes. 2023;11(1):230. doi:10.3390/pr11010230
BibTeX
@article{Huang2023,
author = {Huang, Juan and Hu, Bo and Sun, Songlin and Xiao, Mingtao and Peng, Caiwang and Wang, Hongbing},
title = {Mesh Stiffness and Nonlinear Dynamic Model for a Gear Drive with Revolute Pair Clearance},
journal = {Processes},
year = {2023},
volume = {11},
number = {1},
pages = {230},
doi = {10.3390/pr11010230}
}
EUVIMED