EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Co-Pyrolysis Behavior, Kinetic and Mechanism of Waste-Printed Circuit Board with Biomass

Sonalben B. Prajapati, Alok Gautam, Shina Gautam, Zhitong Yao, Fiseha Tesfaye, Xiaoshu Lü

Processes · 10.01.2023 · 11 (1) · 229

DOI: 10.3390/pr11010229 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Processes, online erschienen am 10.01.2023. Verfasst von Sonalben B. Prajapati und 5 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Svenska kulturfonden (Swedish Cultural Foundation in Finland).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Waste-printed circuit boards (WPCBs) account for approximately 3–6 wt% of total electronic waste. Due to their content of thermosetting materials and added brominated fire retardants, their recycling and disposal is difficult and not eco-friendly. Pyrolysis as a thermal degradation process may assist in the solution of this problem. In addition, using biomass as an additive can upgrade the bio-oil and fix bromines in the char. In this study, cotton stalk (CS) is chosen as an additive and kinetic of the pyrolysis of three samples namely: PCB, CS, and CS:PCB (50:50) were investigated by the thermogravimetric analyzer (TGA) at heating rates of 5, 10, and 15 K/min. Three non-isothermal methods: FWO, KAS, and Starink were found in good agreement with the TGA data; however, the FWO method was more efficient in the description of the degradation mechanism of solid-state reactions. For CS and CS:PCB (50:50), α was increased from 0.2 to 0.9 with the FWO method, and calculated Eα values were found in the range of 121.43–151.88 and 151.60–105.67 kJ/mol in zone 1, while 197.06–79.22 and 115.90–275.06 kJ/mol in zone 2, respectively. Whereas, for PCB in zone 1, Eα values were found to be in the range of 190.23–93.88 kJ/mol. The possible decomposition mechanism was determined by the Criado method, which was in agreement with the mechanism model for reaction order n = 3. The oil product was also analyzed using Fourier-Transform Infrared Spectroscopy analysis.

Förderung

  • Svenska kulturfonden (Swedish Cultural Foundation in Finland)

Zitieren

APA

Prajapati, S. B., Gautam, A., Gautam, S., Yao, Z., Tesfaye, F., & Lü, X. (2023). Co-Pyrolysis Behavior, Kinetic and Mechanism of Waste-Printed Circuit Board with Biomass. Processes, 11(1), 229. https://doi.org/10.3390/pr11010229

Vancouver

Prajapati SB, Gautam A, Gautam S, Yao Z, Tesfaye F, Lü X. Co-Pyrolysis Behavior, Kinetic and Mechanism of Waste-Printed Circuit Board with Biomass. Processes. 2023;11(1):229. doi:10.3390/pr11010229

BibTeX
@article{Prajapati2023,
  author = {Prajapati, Sonalben B. and Gautam, Alok and Gautam, Shina and Yao, Zhitong and Tesfaye, Fiseha and Lü, Xiaoshu},
  title = {Co-Pyrolysis Behavior, Kinetic and Mechanism of Waste-Printed Circuit Board with Biomass},
  journal = {Processes},
  year = {2023},
  volume = {11},
  number = {1},
  pages = {229},
  doi = {10.3390/pr11010229}
}
Kostenlos starten →