EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multidimensional Particle Separation by Tilted-Angle Standing Surface Acoustic Waves—Physics, Control, and Design

Sebastian Sachs, Jörg König, Christian Cierpka

Powders · 08.01.2025 · 4 (1) · 2

DOI: 10.3390/powders4010002 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Powders, online erschienen am 08.01.2025. Verfasst von Sebastian Sachs und 2 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 100 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Research Foundation (DFG).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lab-on-a-Chip devices based on tilted-angle standing surface acoustic waves (tasSAWs) emerged as a promising technology for multidimensional particle separation, highly selective in particle size and acoustic contrast factor. For this active separation method, a tailored acoustic field is used to focus and separate particles on stationary pressure nodes by means of the acoustic radiation force. However, additional non-linear acoustofluidic phenomena, such as the acoustically induced fluid flow or dielectrophoretic effects, are superimposed on the separation process. To obtain a particle separation of high quality, control parameters that can be adjusted during the separation process as well as design parameters are available. The latter are specified prior to the separation and span a high-dimensional parameter space, ranging from the acoustic wavelength to the dimensions and materials used for the microchannel. In this paper, the physical mechanisms to control and design tasSAW-based separation devices are reviewed. By combining experimental, semi-analytical, and numerical findings, a critical channel height and width are derived to suppress the influence of the acoustically induced fluid flow. Dealing with the three-dimensional nature of the separation process, particles are focused at different height levels of equal force balance by implementing a channel cover of high acoustic impedance while achieving an approx. three-times higher acoustic pressure. Using this improved channel design, the particle shape is identified as an additional separation criterion, rendering the continuous acoustofluidic particle separation as a multidimensional technology capable of selectively separating microparticles below 10 μm with regard to size, acoustic contrast, and shape.

Förderung

  • German Research Foundation (DFG)

Zitieren

APA

Sachs, S., König, J., & Cierpka, C. (2025). Multidimensional Particle Separation by Tilted-Angle Standing Surface Acoustic Waves—Physics, Control, and Design. Powders, 4(1), 2. https://doi.org/10.3390/powders4010002

Vancouver

Sachs S, König J, Cierpka C. Multidimensional Particle Separation by Tilted-Angle Standing Surface Acoustic Waves—Physics, Control, and Design. Powders. 2025;4(1):2. doi:10.3390/powders4010002

BibTeX
@article{Sachs2025,
  author = {Sachs, Sebastian and König, Jörg and Cierpka, Christian},
  title = {Multidimensional Particle Separation by Tilted-Angle Standing Surface Acoustic Waves—Physics, Control, and Design},
  journal = {Powders},
  year = {2025},
  volume = {4},
  number = {1},
  pages = {2},
  doi = {10.3390/powders4010002}
}
Kostenlos starten →