EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Investigation of the Flow Conditions in Spiral Jet Mills via Particle Image Velocimetry—Influence of Product Outlet Diameter and Gas Flow Rate

Lisa Marie Radeke, Niklas Jongebloed, Mathias Ulbricht, Heyko Jürgen Schultz

Powders · 13.03.2023 · 2 (1) · 169-188

DOI: 10.3390/powders2010012 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Powders, online erschienen am 13.03.2023. Verfasst von Lisa Marie Radeke und 3 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Spiral jet mills used for fine and colloid grinding have an enormously high energy consumption resulting in a great potential for optimization. In order to increase their efficiency, it is essential to precisely understand the flow conditions within the grinding chamber and the influencing parameters. In this work, the experimental method of particle image velocimetry is applied, which is optimized to the extent that the velocity fields of the grinding gas flow can be determined in the entire mill cross-section. Additionally, the influence of the product outlet diameter and the grinding gas flow rate on the flow profiles are investigated. With decreasing outlet diameter, significantly higher velocities are obtained in the inner mill region resulting in higher classifying efficiencies. At the same time, as the outlet diameter declines, an overpressure builds up in the mill, causing a deceleration of the entire flow in the outer region, preventing the complete formation of the nozzle jets and leading to worse comminution efficiencies. Therefore, there is an optimum between the competing comminution and classifying processes regarding the effect of the product outlet diameter. In contrast, increasing the gas flow rate can consistently achieve a gain in velocity, improving both comminution and classifying efficiency.

Zitieren

APA

Radeke, L. M., Jongebloed, N., Ulbricht, M., & Schultz, H. J. (2023). Experimental Investigation of the Flow Conditions in Spiral Jet Mills via Particle Image Velocimetry—Influence of Product Outlet Diameter and Gas Flow Rate. Powders, 2(1), 169-188. https://doi.org/10.3390/powders2010012

Vancouver

Radeke LM, Jongebloed N, Ulbricht M, Schultz HJ. Experimental Investigation of the Flow Conditions in Spiral Jet Mills via Particle Image Velocimetry—Influence of Product Outlet Diameter and Gas Flow Rate. Powders. 2023;2(1):169-188. doi:10.3390/powders2010012

BibTeX
@article{Radeke2023,
  author = {Radeke, Lisa Marie and Jongebloed, Niklas and Ulbricht, Mathias and Schultz, Heyko Jürgen},
  title = {Experimental Investigation of the Flow Conditions in Spiral Jet Mills via Particle Image Velocimetry—Influence of Product Outlet Diameter and Gas Flow Rate},
  journal = {Powders},
  year = {2023},
  volume = {2},
  number = {1},
  pages = {169--188},
  doi = {10.3390/powders2010012}
}
Kostenlos starten →