Sequential Dual-Cure Thiol–Epoxy Vitrimer Nanocomposites from Click Chemistry: Advanced Properties and Multifunctionality
Polymers · 20.11.2026 · 18 (22) · 2921
DOI: 10.3390/polym18222921 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 20.11.2026. Verfasst von Ignacio Collado und 3 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Agencia Estatal de Investigación.
Abstract (Originalsprache)
Sequential dual curing enables staged shaping of multifunctional thermosets. DGEBA/thiol/1-methylimidazole composites containing multi-walled carbon nanotubes (MWCNT), graphene nanoplatelets (GNP), Fe3O4 or Fe2O3 were assessed for curing, morphology, thermomechanical properties, electrical and thermal transport, self-heating, shape memory, de-icing, shielding, strain sensitivity, wettability, storage stability and stress relaxation. Carbon fillers (thiol:epoxy ratio r = 0.7) and oxides (r = 0.8) used matching unfilled controls and volume-fraction normalisation. MWCNT enabled electrical actuation and in situ curing, with a model-free percolation bracket of 0.003–0.006 vol % and 18.6 dB shielding at 0.10 vol %. GNP favoured thermal management and electrothermal de-icing: thermal conductivity rose from 0.20 to 1.25 W m−1 K−1, the critical Joule field fell below 1 V mm−1 and the average-to-maximum overheat ratio reached 0.9. GNP also achieved 24 dB shielding. Fe3O4 favoured thermomechanical reinforcement, raising Tg by 13.6 K at 1.2 vol %; shape fixity reached 99.7%. Fe2O3 favoured contactless heating, reaching a 100 K average overheat at 85–165 mT. Representative formulations showed stress relaxation consistent with bond exchange, with filler-induced changes in mean relaxation time at 180 °C within a factor of 1.5. Activation energies were 74–89 kJ mol−1; Arrhenius extrapolation predicted mean relaxation times of 30 min at 184–195 °C, below the reported 225 °C stability limit. Filler selection must preserve the second cure.
Förderung
- Agencia Estatal de Investigación
Zitieren
APA
Collado, I., Vázquez-López, A., Jiménez-Suárez, A., & Prolongo, S. G. (2026). Sequential Dual-Cure Thiol–Epoxy Vitrimer Nanocomposites from Click Chemistry: Advanced Properties and Multifunctionality. Polymers, 18(22), 2921. https://doi.org/10.3390/polym18222921
Vancouver
Collado I, Vázquez-López A, Jiménez-Suárez A, Prolongo SG. Sequential Dual-Cure Thiol–Epoxy Vitrimer Nanocomposites from Click Chemistry: Advanced Properties and Multifunctionality. Polymers. 2026;18(22):2921. doi:10.3390/polym18222921
BibTeX
@article{Collado2026,
author = {Collado, Ignacio and Vázquez-López, Antonio and Jiménez-Suárez, Alberto and Prolongo, Silvia G.},
title = {Sequential Dual-Cure Thiol–Epoxy Vitrimer Nanocomposites from Click Chemistry: Advanced Properties and Multifunctionality},
journal = {Polymers},
year = {2026},
volume = {18},
number = {22},
pages = {2921},
doi = {10.3390/polym18222921}
}
EUVIMED