EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Avian Eggshell Source and Filler Content on the Microstructure and Mechanical Properties of PMMA-Based Composites

Carmen Opriș, Dragoș Buzdugan, Iasmina-Mădălina Petculescu, Emanoil Linul, Ion-Dragoș Uțu, Ioan Valentin Cazacu

Polymers · 20.11.2026 · 18 (22) · 2919

DOI: 10.3390/polym18222919 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.11.2026. Verfasst von Carmen Opriș und 5 weiteren Autor:innen. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Eggshell-derived calcium carbonate is a promising secondary filler, but its effect on polymer performance depends on particle origin, loading, and the mechanical scale considered. Chicken (CE), duck (DU), and quail (QE) eggshells were processed under the same conditions and incorporated into a Technovit 4004 poly (methyl methacrylate)-based matrix at 10, 20, and 30 wt.%. Powder morphology and chemistry were examined by scanning electron microscopy and energy-dispersive X-ray spectroscopy, crystalline phases by X-ray diffraction, and mechanical response by instrumented nanoindentation, Vickers hardness, and tensile testing. All three powders were predominantly calcitic, although their observed fragment dimensions and apparent coherent-domain sizes differed. DU had the largest apparent crystallite size (59.2 nm), while CE-rich regions had the highest local indentation hardness (3268.7 ± 657.6 MPa). Vickers hardness varied comparatively modestly across formulations. The highest tensile modulus was obtained for QE30 (5.37 GPa), approximately 57% above the unfilled reference (Holm-adjusted p = 0.00145); however, mean tensile strength, nominal strain at tensile strength, and absorbed energy were lower in all filled formulations. These results demonstrate that enhanced local mineral stiffness and composite tensile stiffness do not necessarily translate into improved tensile integrity. The comparison of the investigated filler batches highlights the trade-offs relevant to using avian eggshell waste as a functional filler in acrylic composites.

Zitieren

APA

Opriș, C., Buzdugan, D., Petculescu, I., Linul, E., Uțu, I., & Cazacu, I. V. (2026). Influence of Avian Eggshell Source and Filler Content on the Microstructure and Mechanical Properties of PMMA-Based Composites. Polymers, 18(22), 2919. https://doi.org/10.3390/polym18222919

Vancouver

Opriș C, Buzdugan D, Petculescu I, Linul E, Uțu I, Cazacu IV. Influence of Avian Eggshell Source and Filler Content on the Microstructure and Mechanical Properties of PMMA-Based Composites. Polymers. 2026;18(22):2919. doi:10.3390/polym18222919

BibTeX
@article{Opri2026,
  author = {Opriș, Carmen and Buzdugan, Dragoș and Petculescu, Iasmina-Mădălina and Linul, Emanoil and Uțu, Ion-Dragoș and Cazacu, Ioan Valentin},
  title = {Influence of Avian Eggshell Source and Filler Content on the Microstructure and Mechanical Properties of PMMA-Based Composites},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {22},
  pages = {2919},
  doi = {10.3390/polym18222919}
}
Kostenlos starten →