EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multiscale Numerical Modeling of Tensile Cracking in Engineered Cementitious Composites: A Review

Qiang Liu, Chunlei Zhang, Hong Xiao

Polymers · 19.11.2026 · 18 (22) · 2902

DOI: 10.3390/polym18222902 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 19.11.2026. Verfasst von Qiang Liu und 2 weiteren Autor:innen. Die Arbeit nennt 83 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fiber bridging and matrix fracture jointly govern tensile cracking in engineered cementitious composites (ECC), and the modeling scale depends on the response of interest. This structured narrative review uses topic searches and citation tracking to compare macroscale, Meso-II and Meso-I models. The comparison covers numerical method, spatial dimension, fiber representation, material variability, crack prediction and experimental evaluation. At the macroscale, a tensile damage model predicted a static peak load of 67.5 kN and a corresponding midspan deflection of 20.4 mm for a bridge deck link slab, compared with 67.1 kN and 21.1 mm measured. At Meso-II, a stochastic cohesive crack model linked collective bridging to multiple cracking and, with variable sectional fiber content, predicted a mean ultimate tensile strain of 1.78%, compared with 1.86% measured. At Meso-I, a three-dimensional finite element model resolved load transfer by individual fibers and predicted a mean crack width of 128 μm in direct tension, compared with 129 ± 12 μm measured. These comparisons identify the strengths and limitations of each scale, guide model selection for structural analysis, crack control and fiber–matrix interface design and establish priorities for further research.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Liu, Q., Zhang, C., & Xiao, H. (2026). Multiscale Numerical Modeling of Tensile Cracking in Engineered Cementitious Composites: A Review. Polymers, 18(22), 2902. https://doi.org/10.3390/polym18222902

Vancouver

Liu Q, Zhang C, Xiao H. Multiscale Numerical Modeling of Tensile Cracking in Engineered Cementitious Composites: A Review. Polymers. 2026;18(22):2902. doi:10.3390/polym18222902

BibTeX
@article{Liu2026,
  author = {Liu, Qiang and Zhang, Chunlei and Xiao, Hong},
  title = {Multiscale Numerical Modeling of Tensile Cracking in Engineered Cementitious Composites: A Review},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {22},
  pages = {2902},
  doi = {10.3390/polym18222902}
}
Kostenlos starten →