An Environmentally Friendly, High-Temperature-Resistant Zwitterionic Starch-Graft Copolymer for Fluid-Loss Control in Water-Based Drilling Fluids
Polymers · 18.11.2026 · 18 (22) · 2890
DOI: 10.3390/polym18222890 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 18.11.2026. Verfasst von Fengbao Liu und 6 weiteren Autor:innen. Die Arbeit nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
Conventional starch-based fluid-loss reducers perform poorly when high temperature is combined with high salinity or calcium contamination. This work developed a zwitterionic starch-graft copolymer, J-1, to improve performance under these conditions. Corn starch served as the backbone. N,N-dimethylacrylamide (DMAA), 2-acrylamido-2-methylpropanesulfonic acid (AMPS), and [3-(methacryloylamino)propyl]dimethyl(3-sulfopropyl)ammonium hydroxide inner salt (MPDSAH) were grafted onto it. After hot rolling at 160 °C for 16 h, 2.0 wt% J-1 gave API and HTHP fluid losses of 1.8 and 13.4 mL. Under saturated NaCl conditions, these values were 2.8 and 16.4 mL. In a 2.0 g/cm3 barite-weighted fluid containing 3.0 wt% J-1 and 3.0 wt% NF-1, the values were 5.4 and 24.0 mL. Mechanistic tests showed that J-1 adsorbed on clay surfaces and limited salt- and calcium-induced aggregation. It also promoted finer particle dispersion and a denser filter cake. At 2.0 wt%, J-1 reduced filter-cake permeability by 98.7%. The product showed low biotoxicity and favorable environmental compatibility. These results support its use as a starch-based fluid-loss reducer for high-temperature water-based drilling fluids.
Förderung
- Fundamental Research Funds for the Central Universities
Zitieren
APA
Liu, F., Yin, D., Wang, J., Huang, X., Wu, H., Quan, P., & Hu, Z. (2026). An Environmentally Friendly, High-Temperature-Resistant Zwitterionic Starch-Graft Copolymer for Fluid-Loss Control in Water-Based Drilling Fluids. Polymers, 18(22), 2890. https://doi.org/10.3390/polym18222890
Vancouver
Liu F, Yin D, Wang J, Huang X, Wu H, Quan P, et al. An Environmentally Friendly, High-Temperature-Resistant Zwitterionic Starch-Graft Copolymer for Fluid-Loss Control in Water-Based Drilling Fluids. Polymers. 2026;18(22):2890. doi:10.3390/polym18222890
BibTeX
@article{Liu2026,
author = {Liu, Fengbao and Yin, Da and Wang, Jian and Huang, Xianbin and Wu, Hongyu and Quan, Peimin and Hu, Zhongci},
title = {An Environmentally Friendly, High-Temperature-Resistant Zwitterionic Starch-Graft Copolymer for Fluid-Loss Control in Water-Based Drilling Fluids},
journal = {Polymers},
year = {2026},
volume = {18},
number = {22},
pages = {2890},
doi = {10.3390/polym18222890}
}
EUVIMED