EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Performance and Parametric Sensitivity of a Self-Anchored Suspension Bridge with CFRP Main Cables

Wenchao Zhang, Tie Li, Kedian Luo, Lijun Jia, Haibing Chen, Nengrong Guo

Polymers · 17.11.2026 · 18 (22) · 2887

DOI: 10.3390/polym18222887 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.11.2026. Verfasst von Wenchao Zhang und 5 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangxi Provincial Department of Transportation Science and Technology Project, Jiangxi Provincial Natural Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon-fiber-reinforced polymer (CFRP) is a lightweight, high-strength, and corrosion-resistant alternative for suspension bridge main cables, but its lower axial stiffness may alter the global response of a self-anchored system. This study investigates a three-span self-anchored suspension bridge with a span arrangement of 130 + 336 + 130 m. A steel main cable was replaced with a CFRP main cable of comparable nominal tensile capacity, and three-dimensional finite-element models were used to compare completed-bridge and service-stage responses. The effects of the sag-to-span ratio, side-to-main-span ratio, anchor-span length, CFRP elastic modulus, and tensile strength were then evaluated. Relative to the steel main cable scheme, the CFRP scheme reduced the maximum main cable tension and compressive axial force in the stiffening girder by 4.24% and 3.61%, respectively, but increased the completed-bridge maximum positive girder moment by 28.04%. Under live load, the maximum positive girder moment and vertical deflection increased by 1.63% and 7.63%. Geometric parameters altered cable horizontal force and end rotational restraint, whereas CFRP elastic modulus and tensile strength affected the axial stiffness EA through different mechanisms. These comparative numerical results suggest that tensile capacity, axial stiffness, and system geometry should be considered jointly in the structural design of self-anchored suspension bridges with CFRP main cables.

Förderung

  • Jiangxi Provincial Department of Transportation Science and Technology Project
  • Jiangxi Provincial Natural Science Foundation

Zitieren

APA

Zhang, W., Li, T., Luo, K., Jia, L., Chen, H., & Guo, N. (2026). Mechanical Performance and Parametric Sensitivity of a Self-Anchored Suspension Bridge with CFRP Main Cables. Polymers, 18(22), 2887. https://doi.org/10.3390/polym18222887

Vancouver

Zhang W, Li T, Luo K, Jia L, Chen H, Guo N. Mechanical Performance and Parametric Sensitivity of a Self-Anchored Suspension Bridge with CFRP Main Cables. Polymers. 2026;18(22):2887. doi:10.3390/polym18222887

BibTeX
@article{Zhang2026,
  author = {Zhang, Wenchao and Li, Tie and Luo, Kedian and Jia, Lijun and Chen, Haibing and Guo, Nengrong},
  title = {Mechanical Performance and Parametric Sensitivity of a Self-Anchored Suspension Bridge with CFRP Main Cables},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {22},
  pages = {2887},
  doi = {10.3390/polym18222887}
}
Kostenlos starten →