Interpreting Life-Cycle Assessments of Polyolefin Recycling: A Critical Review
Polymers · 14.11.2026 · 18 (22) · 2858
DOI: 10.3390/polym18222858 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 14.11.2026. Verfasst von Junaid Saleem und 2 weiteren Autor:innen. Die Arbeit nennt 129 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Polyethylene (PE) and polypropylene (PP) make up a large share of plastic waste, yet life-cycle assessments (LCAs) of their recycling often reach conflicting route rankings. Here we critically review 71 primary LCA publications on mechanical, solvent-based, and thermochemical recycling, with a focus on feedstock condition, recovered-product function, and modeling assumptions. Mechanical recycling reduced greenhouse-gas emissions of rigid PP by about 80% relative to virgin resin, compared with about 30% for solvent-assisted recycling, but delivered lower-quality recyclate. Dissolution recovers near-virgin polymer from multilayer and contaminated streams. However, lowering the solvent recycle rate from 99% to 92% raised its emissions from 1.74 to 4.00 kg CO2 per kg of recyclate. Most thermochemical assessments are prospective models sensitive to electricity and hydrogen supply. For pyrolysis, the inventory source alone shifted the climate-impact range from between 0.75 and 1.53 to between 1.24 and 6.51 kg CO2-eq per kg of waste. Credit conventions also reversed rankings: energy recovery moved from −0.67 to 1.13 kg CO2-eq per kg when credits followed the market shares of displaced products. We propose a four-stage framework that checks decision context, functional equivalence, consistency of system modeling, and evidence robustness. Mechanical recycling therefore remains the benchmark for clean, sortable streams whose recyclate meets the intended application and credibly substitutes virgin polymer. Dissolution is most defensible for multilayer or contaminated streams that need purification, provided that solvent recovery is high and that the quality gain displaces virgin resin. Thermochemical conversion is most relevant for residues that cannot return to an adequate polymer application, and its benefit depends on electricity supply, hydrogen supply for hydrocracking and hydrogenolysis, product destination, and credits. The routes are better treated as complementary: in the integrated assessments reviewed, combining mechanical recycling with pyrolysis of sorting residues lowered climate impact compared with residue incineration or pyrolysis alone.
Zitieren
APA
Saleem, J., Moghal, Z. K. B., & McKay, G. (2026). Interpreting Life-Cycle Assessments of Polyolefin Recycling: A Critical Review. Polymers, 18(22), 2858. https://doi.org/10.3390/polym18222858
Vancouver
Saleem J, Moghal ZKB, McKay G. Interpreting Life-Cycle Assessments of Polyolefin Recycling: A Critical Review. Polymers. 2026;18(22):2858. doi:10.3390/polym18222858
BibTeX
@article{Saleem2026,
author = {Saleem, Junaid and Moghal, Zubair Khalid Baig and McKay, Gordon},
title = {Interpreting Life-Cycle Assessments of Polyolefin Recycling: A Critical Review},
journal = {Polymers},
year = {2026},
volume = {18},
number = {22},
pages = {2858},
doi = {10.3390/polym18222858}
}
EUVIMED