Thermomechanical Behavior of Kirigami-Based Shape-Memory PLA Structures: Finite Element Analysis and Experimental Investigation
Polymers · 13.11.2026 · 18 (22) · 2846
DOI: 10.3390/polym18222846 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 13.11.2026. Verfasst von Hümeyra Şevval Balcı und 3 weiteren Autor:innen. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific and Technological Research Council of Turkey.
Abstract (Originalsprache)
Deployable shape-memory polymer lattice architectures enable transitions between compact temporary configurations and recovered geometries, with their performance governed by cellular topology, compressibility, shape recovery, and post-cycle mechanical stability. This study numerically and experimentally investigated kirigami-based shape-memory PLA structures as an engineering proof of concept. The main novelty is the integration of three unscaled kirigami cores—Rotating Squares, Honeycomb, and re-entrant—within a common deployable reference frame across 19 configurations. By comparing finite element predictions with experiments on FDM-printed PLA structures, the study identifies topology-dependent trade-offs among compressibility, shape fixity, shape recovery, and post-cycle mechanical performance, as well as limitations of numerical prediction. Hybrid structures exhibited greater total compressibility than the reference frame and corresponding cores; H-RE-80 showed the highest values, at 74.4% numerically and 76.8% experimentally. H-RS structures showed controlled deformation behavior but did not consistently pre-serve their initial stiffness after cycling; H-HC structures showed a comparatively balanced overall performance, and H-RE structures provided the greatest geometric reduction. Numerical predictions reproduced the main compression trends but showed geometry-dependent deviations in shape fixity and effective elastic modulus. Overall, architecture selection should balance compactability, shape-memory response, and post-recovery mechanical function rather than maximize a single metric.
Förderung
- Scientific and Technological Research Council of Turkey
Zitieren
APA
Balcı, H. Ş., Balcı, F., Ekinci, İ., & Ali, D. (2026). Thermomechanical Behavior of Kirigami-Based Shape-Memory PLA Structures: Finite Element Analysis and Experimental Investigation. Polymers, 18(22), 2846. https://doi.org/10.3390/polym18222846
Vancouver
Balcı HŞ, Balcı F, Ekinci İ, Ali D. Thermomechanical Behavior of Kirigami-Based Shape-Memory PLA Structures: Finite Element Analysis and Experimental Investigation. Polymers. 2026;18(22):2846. doi:10.3390/polym18222846
BibTeX
@article{Balc2026,
author = {Balcı, Hümeyra Şevval and Balcı, Furkan and Ekinci, İzel and Ali, Daver},
title = {Thermomechanical Behavior of Kirigami-Based Shape-Memory PLA Structures: Finite Element Analysis and Experimental Investigation},
journal = {Polymers},
year = {2026},
volume = {18},
number = {22},
pages = {2846},
doi = {10.3390/polym18222846}
}
EUVIMED