EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

CaCO3-Filled Polypropylene Block Copolymer Composites: Strain-Rate-Dependent Tensile Behavior, Bergström–Boyce Calibration, Parameter Identifiability, and Creep and Stress-Relaxation Prediction

Şenol Şahin, Emir Haktan Ünal, Ferhat Akpınar

Polymers · 12.11.2026 · 18 (22) · 2836

DOI: 10.3390/polym18222836 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 12.11.2026. Verfasst von Şenol Şahin und 2 weiteren Autor:innen. Die Arbeit nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific Research Projects Coordination Unit of Kocaeli University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Finite element analysis predicts the response of filled polymers only when the constitutive model suits the material and its parameters are reliably identified. This study evaluates the applicability and limits of the Bergström–Boyce (BB) model for calcium carbonate (CaCO3)-filled polypropylene block copolymer (PPB). Neat PPB and composites with 10, 20, and 30 vol% CaCO3 are tested in uniaxial tension at five strain rates and characterized by dynamic mechanical analysis and differential scanning calorimetry. The BB parameters are identified by a multi-start evolution strategy with trust-region refinement, and their identifiability is assessed by sensitivity, Fisher-information, profile, and multi-start analyses. The filler raises Young’s modulus from 1523 to 3716 MPa while reducing ductility and rate sensitivity. The model reproduces the tensile response with R2 = 0.94–0.99 in calibration and 0.96–0.99 at the two withheld strain rates, whereas the viscous-network locking stretch is unidentifiable. Without refitting, the parameters predict the stress relaxed in 1 h within a median factor of 1.3. Predicted creep, however, inherits the stress exponent of the flow rule and approaches the measurements only near 11–17 MPa. Identifiability established in tension is thus local to the calibration conditions; sustained loading requires creep or relaxation data at the service stress.

Förderung

  • Scientific Research Projects Coordination Unit of Kocaeli University

Zitieren

APA

Şahin, Ş., Ünal, E. H., & Akpınar, F. (2026). CaCO3-Filled Polypropylene Block Copolymer Composites: Strain-Rate-Dependent Tensile Behavior, Bergström–Boyce Calibration, Parameter Identifiability, and Creep and Stress-Relaxation Prediction. Polymers, 18(22), 2836. https://doi.org/10.3390/polym18222836

Vancouver

Şahin Ş, Ünal EH, Akpınar F. CaCO3-Filled Polypropylene Block Copolymer Composites: Strain-Rate-Dependent Tensile Behavior, Bergström–Boyce Calibration, Parameter Identifiability, and Creep and Stress-Relaxation Prediction. Polymers. 2026;18(22):2836. doi:10.3390/polym18222836

BibTeX
@article{ahin2026,
  author = {Şahin, Şenol and Ünal, Emir Haktan and Akpınar, Ferhat},
  title = {CaCO3-Filled Polypropylene Block Copolymer Composites: Strain-Rate-Dependent Tensile Behavior, Bergström–Boyce Calibration, Parameter Identifiability, and Creep and Stress-Relaxation Prediction},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {22},
  pages = {2836},
  doi = {10.3390/polym18222836}
}
Kostenlos starten →