EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Upcycling Polylactide into UV-Curable Pressure-Sensitive Adhesives via Glycolysis and Maleic Anhydride Functionalization

Gadir S. Aliev, Marina A. Evdokimenko, Kirill A. Kirshanov, Nadezhda A. Lobanova, Anton M. Pogorely, Roman V. Toms, Alexander Y. Gervald

Polymers · 12.11.2026 · 18 (22) · 2831

DOI: 10.3390/polym18222831 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 12.11.2026. Verfasst von Gadir S. Aliev und 6 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Open-loop recycling can valorize polylactide (PLA) when mechanical recycling or industrial composting is impractical. This study links PLA glycolysis modeling to UV-curable pressure-sensitive adhesive (PSA) development. A six-reaction transesterification model was calibrated against published data and used to select glycolysis conditions: 120 min at 220 °C and a PLA-repeat-unit:glycerol molar ratio of 1:0.25. Model–experiment discrepancies were 0.2% for hydroxyl value, 10.9% for apparent number-average molar mass, and 3.3% for apparent weight-average molar mass, indicating agreement with the calibration dataset. Oligomers were partially esterified with maleic anhydride (MA; nominal OH:MA ratios of 1:0.2–1:0.7) under ATR-FTIR monitoring and UV-cured at 365 nm with 10–40 wt.% 2-hydroxyethyl acrylate (HEA) on precursor mass. Tack and T-peel resistance increased with HEA loading, whereas apparent lap-shear strength showed precursor-dependent trends, including intermediate-loading maxima. A formulation with OH:MA = 1:0.5 and 30 parts HEA combined an apparent lap-shear strength of 0.30 MPa, T-peel resistance of 0.20 N/mm, and loop-tack force of 9.6 N/25 mm. These findings support glycolysis-derived PLA oligomers as tunable, partially biobased, PSA precursors.

Förderung

  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Aliev, G. S., Evdokimenko, M. A., Kirshanov, K. A., Lobanova, N. A., Pogorely, A. M., Toms, R. V., & Gervald, A. Y. (2026). Upcycling Polylactide into UV-Curable Pressure-Sensitive Adhesives via Glycolysis and Maleic Anhydride Functionalization. Polymers, 18(22), 2831. https://doi.org/10.3390/polym18222831

Vancouver

Aliev GS, Evdokimenko MA, Kirshanov KA, Lobanova NA, Pogorely AM, Toms RV, et al. Upcycling Polylactide into UV-Curable Pressure-Sensitive Adhesives via Glycolysis and Maleic Anhydride Functionalization. Polymers. 2026;18(22):2831. doi:10.3390/polym18222831

BibTeX
@article{Aliev2026,
  author = {Aliev, Gadir S. and Evdokimenko, Marina A. and Kirshanov, Kirill A. and Lobanova, Nadezhda A. and Pogorely, Anton M. and Toms, Roman V. and Gervald, Alexander Y.},
  title = {Upcycling Polylactide into UV-Curable Pressure-Sensitive Adhesives via Glycolysis and Maleic Anhydride Functionalization},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {22},
  pages = {2831},
  doi = {10.3390/polym18222831}
}
Kostenlos starten →