EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Facile Fabrication of Multilayer Chemical Filters Based on Modified Activated Carbon and Activated Carbon Fiber Nonwovens for Airborne Molecular Contaminant Removal in Semiconductor Manufacturing

Jia-Wun Li iD, Chia-Lin Li, Jen-Kai Yang, Jung-Feng Chang, Yu-Heng Liao, Chih-Wei Chiu iD

Polymers · 06.11.2026 · 18 (21) · 2774

DOI: 10.3390/polym18212774 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.11.2026. Verfasst von Jia-Wun Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council, National Science and Technology Council (NSTC), Taiwan.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, high-performance chemical filters were developed by combining surface-modified activated carbon with activated carbon fiber (ACF) nonwoven layers to improve the removal of volatile organic compounds (VOCs) and acidic/basic gases. Activated carbon was modified using ammonium hydroxide, formic acid, and nitric acid, and the resulting pore structure, surface morphology, and functional groups were characterized using BET, FE-SEM, and XPS analyses. AC-NH4OH exhibited a favorable microporous structure and high specific surface area, and exhibited the best adsorption performance toward toluene, isopropyl alcohol (IPA), and acetic acid, whereas AC-HNO3 showed the best performance toward ammonia, possibly associated with changes in its surface functional groups. The modified activated carbon was further incorporated into chemical filters with nonwoven fabrics and adhesive. Because increasing adhesive content reduced adsorption performance through surface coverage and pore blockage, 5 wt% adhesive was selected as the preferred formulation among the adhesive-containing samples investigated. The optimized filters outperformed a commercial chemical filter for all tested gases. The incorporation of ACF provided additional microporous adsorption sites, and a single ACF layer improved the effective removal time for toluene and IPA by approximately 10.5% and 14.7%, respectively. These findings demonstrate the potential of integrating surface-modified activated carbon with ACF nonwoven layers to enhance gaseous pollutant removal for airborne molecular contaminant control in semiconductor manufacturing.

Schlagwörter

Stichwörter der Autor:innen

activated carbonactivated carbon fiberammoniachemical filtersurface modificationvolatile organic compounds (VOCs)

Autor:innen und Institutionen

  • Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan.
  • Origin Advanced Materials Corporation, Taipei 10557, Taiwan.

ORCID-Profile: Jia-Wun Li, Chih-Wei Chiu

Förderung

  • National Science and Technology Council
  • National Science and Technology Council (NSTC), Taiwan

Zitieren

APA

Li, J. W., Li, C. L., Yang, J. K., Chang, J. F., Liao, Y. H., & Chiu, C. W. (2026). Facile Fabrication of Multilayer Chemical Filters Based on Modified Activated Carbon and Activated Carbon Fiber Nonwovens for Airborne Molecular Contaminant Removal in Semiconductor Manufacturing. Polymers, 18(21), 2774. https://doi.org/10.3390/polym18212774

Vancouver

Li JW, Li CL, Yang JK, Chang JF, Liao YH, Chiu CW. Facile Fabrication of Multilayer Chemical Filters Based on Modified Activated Carbon and Activated Carbon Fiber Nonwovens for Airborne Molecular Contaminant Removal in Semiconductor Manufacturing. Polymers. 2026;18(21):2774. doi:10.3390/polym18212774

BibTeX
@article{Li2026,
  author = {Li, Jia-Wun and Li, Chia-Lin and Yang, Jen-Kai and Chang, Jung-Feng and Liao, Yu-Heng and Chiu, Chih-Wei},
  title = {Facile Fabrication of Multilayer Chemical Filters Based on Modified Activated Carbon and Activated Carbon Fiber Nonwovens for Airborne Molecular Contaminant Removal in Semiconductor Manufacturing},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {21},
  pages = {2774},
  doi = {10.3390/polym18212774}
}
Kostenlos starten →