Experimental and Inverse Analysis of Natural Cork Material with Anisotropic Nonlinear Viscoelastic Behavior
Polymers · 02.11.2026 · 18 (21) · 2722
DOI: 10.3390/polym18212722 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 02.11.2026. Verfasst von Cylia Yahiaoui und 4 weiteren Autor:innen. Beteiligte Einrichtung: Laboratoire Mécatronique (LMT), Faculty of Sciences and Technology, University of Jijel, Jijel 18000, Algeria. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Due to its cellular structure, cork from Quercus suber has significant deformability, showing magnificent recovery after being compressed by 50%. Its mechanical characteristics show dependency on the direction of the external load (anisotropy), making it difficult to estimate recoverable large displacements. Here, the mechanical behavior of cork is investigated under loading–unloading cycles (1–15 MPa) in the radial and non-radial directions. Cork demonstrates higher stiffness and higher residual strain in the radial direction, compared to the softer, buckling-dominated behavior in the non-radial direction. Both directions feature significant cycle-by-cycle softening, suggesting a Mullins-type (recoverable) damage mechanism, with residual strain increasing in both directions. According to the data obtained six months after testing, dimensional recovery demonstrates ongoing recovery with varying percentages depending on the direction (92% against 88% of the original height after six months). It supports the theory of softening from cycle to cycle because the damage is primarily pseudo-elastic and therefore recoverable rather than irreversible. A transversely isotropic hyperelastic constitutive model is enriched with Mullins-type (pseudo-elastic) damage and viscoelasticity. The three-dimensional model is based on engineering applications; all parameters are obtained through inverse analysis of loading–unloading tests. Consequently, this model accounts for the anisotropic behavior and increasing recoverable damage of cork, allowing better prediction of its mechanical performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Laboratoire Mécatronique (LMT), Faculty of Sciences and Technology, University of Jijel, Jijel 18000, Algeria.
- Laboratoire de Génie Mécanique-Jijel, University of Jijel, Jijel 18000, Algeria.
- Department of Materials Science and Engineering, Division of Applied Mechanics, Uppsala University, Box 524, 751 20 Uppsala, Sweden.
ORCID-Profile: Cylia Yahiaoui, Younès Saadallah, Reza Afshar, Kristofer Gamstedt, B Emek Abali
Zitieren
APA
Yahiaoui, C., Saadallah, Y., Afshar, R., Gamstedt, K., & Abali, B. E. (2026). Experimental and Inverse Analysis of Natural Cork Material with Anisotropic Nonlinear Viscoelastic Behavior. Polymers, 18(21), 2722. https://doi.org/10.3390/polym18212722
Vancouver
Yahiaoui C, Saadallah Y, Afshar R, Gamstedt K, Abali BE. Experimental and Inverse Analysis of Natural Cork Material with Anisotropic Nonlinear Viscoelastic Behavior. Polymers. 2026;18(21):2722. doi:10.3390/polym18212722
BibTeX
@article{Yahiaoui2026,
author = {Yahiaoui, Cylia and Saadallah, Younès and Afshar, Reza and Gamstedt, Kristofer and Abali, B Emek},
title = {Experimental and Inverse Analysis of Natural Cork Material with Anisotropic Nonlinear Viscoelastic Behavior},
journal = {Polymers},
year = {2026},
volume = {18},
number = {21},
pages = {2722},
doi = {10.3390/polym18212722}
}
EUVIMED