Novel Acyl Phosphine Oxides as Low-Migration Type I Photoinitiators for Radical Polymerization
Polymers · 02.11.2026 · 18 (21) · 2720
DOI: 10.3390/polym18212720 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 02.11.2026. Verfasst von Yinping Wu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Environmental and Chemical Engineering, Zhaoqing University, Zhaoqing 526061, China. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhaoqing University, Zhaoqing City Science and Technology Innovation Guidance Project, Zhaoqing University Innovative Research Team Funding Program.
Abstract (Originalsprache)
TPO-L (Ethyl(2,4,6-trimethylbenzoyl) phenylphosphinate) is a liquid high-efficiency photoinitiator, which is widely used in the UV-LED photopolymerization reaction field. After TPO-L participates in the photopolymerization reaction, the TPO-L that did not participate in the reaction will migrate to the surface of a coating, causing the coating surface to turn yellow and accelerating the aging process of the coating. This issue has attracted increasing attention. To address the high migration issue of TPO-L, in this experiment, three new type I photoinitiators were designed and synthesized, namely TPOLs with acylphosphine oxide structures. The structure of TPOLs can be modified by different lengths of methyl-terminal ethoxy chains. The properties of TPOLs were systematically evaluated through migration experiments, monomer solubility tests, absorption spectra, photopolymerization kinetics, photolysis, free radical trapping experiments, and cellular cytotoxicity. The results show that the absorption maxima of the TPOLs are located at around 372 nm. TPOLs have good solubility in acrylic monomers, and TPOL-2 and TPOL-3 in particular exhibit high photopolymerization efficiency. At a concentration of 50 μM, the cell survival rates of TPOL-1 and TPOL-3 are approximately 90%. It is noteworthy that the migration rate of TPOL-3 in the cured film is as low as 0.02%, significantly lower than the 0.98% of TPO-L, indicating that TPOL-3 has higher migration stability and better environmental compatibility. In summary, these results indicate that TPOL-3 has high initiation efficiency during LED curing, good solubility in monomers, and a low migration rate, making it a promising candidate material for low-migration photopolymerization applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Environmental and Chemical Engineering, Zhaoqing University, Zhaoqing 526061, China.
- New Energy and New Materials Research Center, Zhaoqing University, Zhaoqing 526061, China.
Förderung
- Zhaoqing University
- Zhaoqing City Science and Technology Innovation Guidance Project
- Zhaoqing University Innovative Research Team Funding Program
- Zhaoqing College youth project
- Zhaoqing College students innovation and entrepreneurship training program
- the Zhaoqing City Science and Technology Innovation Guidance Project
- the Zhaoqing University Innovative Research Team Funding Program
Zitieren
APA
Wu, Y., Zhong, J., He, C., Huang, J., Zhang, L., Zhang, B., & Li, X. (2026). Novel Acyl Phosphine Oxides as Low-Migration Type I Photoinitiators for Radical Polymerization. Polymers, 18(21), 2720. https://doi.org/10.3390/polym18212720
Vancouver
Wu Y, Zhong J, He C, Huang J, Zhang L, Zhang B, et al. Novel Acyl Phosphine Oxides as Low-Migration Type I Photoinitiators for Radical Polymerization. Polymers. 2026;18(21):2720. doi:10.3390/polym18212720
BibTeX
@article{Wu2026,
author = {Wu, Yinping and Zhong, Jiayun and He, Chunliu and Huang, Jiaxin and Zhang, Lirong and Zhang, Bo and Li, Xiang},
title = {Novel Acyl Phosphine Oxides as Low-Migration Type I Photoinitiators for Radical Polymerization},
journal = {Polymers},
year = {2026},
volume = {18},
number = {21},
pages = {2720},
doi = {10.3390/polym18212720}
}
EUVIMED