EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Phosphorus-Containing Polyamide Oligomer as a Synergist for Flame-Retardant PA66/GF Composites: Concurrent Improvements in Flame Retardancy and Electrical Safety

Xing Zhang, Lirong Xie, Zhongliang Zhang, Guanghao Guo, Zhichao Zhen, Xuran Liu, Dan Huang iD

Polymers · 01.11.2026 · 18 (21) · 2706

DOI: 10.3390/polym18212706 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 01.11.2026. Verfasst von Xing Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Engineering, North China Institute of Aerospace Engineering, Langfang 065000, China. Die Arbeit nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hebei Provincial Department of Science and Technology, Hebei Natural Science Foundation Committee.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

As electronics become smaller and more power-dense, glass-fiber-reinforced polyamide 66 (PA66/GF) must combine halogen-free flame retardancy with electrical safety, including a glow-wire ignition temperature (GWIT) ≥ 775 °C and a comparative tracking index (CTI) ≥ 600 V. Conventional low-molecular-weight flame retardants often require loadings above 15 parts by mass, impairing mechanical and electrical properties. Here, a phosphorus-containing polyamide oligomer (DOPO–MA–oligomerPA6) was synthesized via a DOPO–MAH intermediate from 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) and maleic anhydride (MAH), followed by polymerization with ε-caprolactam, then melt-blended with aluminum diethylphosphinate (ADP) and melamine polyphosphate (MPP) in PA66/GF. Its oligo-PA6 backbone provides good compatibility with PA66, while its low molecular weight (Mn = 10,984 g mol−1; PDI = 2.569) favors dispersion. The phosphorus groups enhance the efficiency of the ADP/MPP system. With 4 parts oligomer and a total flame-retardant loading of 14 parts by mass per 100 parts PA66/GF, the composite achieved UL-94 V-0 rating, a limiting oxygen index (LOI) of 36.1%, a GWIT of 800 °C, and a CTI of 600 V. Its heat deflection temperature, tensile strength, notched impact strength, and flexural modulus were 178.8 °C, 95.0 MPa, 8.7 kJ m−2, and 8984 MPa, respectively. Compared with the conventional 20-part system, total additive loading decreased by 30%, with simultaneous improvements in flame retardancy, electrical safety, and mechanical properties. This offers a scalable route to high-performance PA66/GF composites.

Schlagwörter

Stichwörter der Autor:innen

PA66/GF compositeselectrical safetyflame-retardant synergisthalogen-free flame retardancyphosphorus-containing polyamide oligomer

Autor:innen und Institutionen

  • College of Materials Engineering, North China Institute of Aerospace Engineering, Langfang 065000, China.
  • National Engineering Research Center of Engineering and Ecological Plastics, Technical Institute of Physics and Chemistry, Chinese Academy of Sciences, Beijing 100190, China.

ORCID-Profile: Dan Huang

Förderung

  • Hebei Provincial Department of Science and Technology
  • Hebei Natural Science Foundation Committee

Zitieren

APA

Zhang, X., Xie, L., Zhang, Z., Guo, G., Zhen, Z., Liu, X., & Huang, D. (2026). A Phosphorus-Containing Polyamide Oligomer as a Synergist for Flame-Retardant PA66/GF Composites: Concurrent Improvements in Flame Retardancy and Electrical Safety. Polymers, 18(21), 2706. https://doi.org/10.3390/polym18212706

Vancouver

Zhang X, Xie L, Zhang Z, Guo G, Zhen Z, Liu X, et al. A Phosphorus-Containing Polyamide Oligomer as a Synergist for Flame-Retardant PA66/GF Composites: Concurrent Improvements in Flame Retardancy and Electrical Safety. Polymers. 2026;18(21):2706. doi:10.3390/polym18212706

BibTeX
@article{Zhang2026,
  author = {Zhang, Xing and Xie, Lirong and Zhang, Zhongliang and Guo, Guanghao and Zhen, Zhichao and Liu, Xuran and Huang, Dan},
  title = {A Phosphorus-Containing Polyamide Oligomer as a Synergist for Flame-Retardant PA66/GF Composites: Concurrent Improvements in Flame Retardancy and Electrical Safety},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {21},
  pages = {2706},
  doi = {10.3390/polym18212706}
}
Kostenlos starten →