Rheological Control of Microsphere Expansion and Cellular Stabilization in Styrene–Butadiene–Styrene Foams
Polymers · 31.10.2026 · 18 (21) · 2696
DOI: 10.3390/polym18212696 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 31.10.2026. Verfasst von Ahmet Hakan Cinar und 6 weiteren Autor:innen. Beteiligte Einrichtung: Polymer Materials Engineering Department, Faculty of Engineering, Yalova University, 77100 Yalova, Turkey. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Lightweight elastomeric foams for footwear, sealing and damping applications require substantial density reduction without loss of cellular stability, yet the role of matrix rheology in expandable-microsphere foaming of oil-extended thermoplastic elastomers remains insufficiently understood. Herein, styrene–butadiene–styrene (SBS) foams were prepared with 1–3 phr thermally expandable microspheres, 10–30 phr additional processing oil and three nominal densities (0.80, 0.65 and 0.45 g cm−3). Increasing oil content reduced matrix elastic and flow resistance by approximately 2–3-fold and increased the mean pore size from 25.2 to 49.6 µm under the intermediate-density condition. Under the lowest-density condition, however, excessive softening reduced cellular stability, raising the pore-size coefficient of variation to 49.7% for LD-30-3. Combined optical microscopy and dielectric measurements showed that larger pores at comparable density did not necessarily correspond to a higher bulk void fraction, while the permittivity response was consistent with a predominantly discrete closed-cell structure. Greater pore expansion did not coincide with maximum mechanical performance: the highest mean toughness (11.50 MJ m−3) was obtained for HD-10-3. Cyclic testing showed that increasing oil content reduced load-bearing capacity but nearly doubled conditioned damping (from approximately 3–4% to 6–7%). Overall, matrix rheological resistance can be used to balance microsphere expansion, cellular retention and function-specific performance in lightweight SBS foams.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Polymer Materials Engineering Department, Faculty of Engineering, Yalova University, 77100 Yalova, Turkey.
- Polyshield Engineering Consultancy and R&D Co., 77100 Yalova, Turkey.
ORCID-Profile: Gökçe Yilmaz, Zuhal Yurtbasi, Alper Kasgoz
Zitieren
APA
Cinar, A. H., Keskin, Z., Sarisoy, F., Yilmaz, G., Yurtbasi, Z., Kasgoz, E., & Kasgoz, A. (2026). Rheological Control of Microsphere Expansion and Cellular Stabilization in Styrene–Butadiene–Styrene Foams. Polymers, 18(21), 2696. https://doi.org/10.3390/polym18212696
Vancouver
Cinar AH, Keskin Z, Sarisoy F, Yilmaz G, Yurtbasi Z, Kasgoz E, et al. Rheological Control of Microsphere Expansion and Cellular Stabilization in Styrene–Butadiene–Styrene Foams. Polymers. 2026;18(21):2696. doi:10.3390/polym18212696
BibTeX
@article{Cinar2026,
author = {Cinar, Ahmet Hakan and Keskin, Zeynep and Sarisoy, Furkan and Yilmaz, Gökçe and Yurtbasi, Zuhal and Kasgoz, Emine and Kasgoz, Alper},
title = {Rheological Control of Microsphere Expansion and Cellular Stabilization in Styrene–Butadiene–Styrene Foams},
journal = {Polymers},
year = {2026},
volume = {18},
number = {21},
pages = {2696},
doi = {10.3390/polym18212696}
}
EUVIMED