EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Scalable Fabrication of Lightweight, Thermally Insulating and Ablation-Resistant SiC/SiOC Hybrid Aerogel Composites Reinforced with High-Porosity Needle-Punched Quartz Fiber Felts

Furui Sun, Yang Yu, Bing Wang, Yi Liu iD, Liuchun Zheng iD

Polymers · 30.10.2026 · 18 (21) · 2694

DOI: 10.3390/polym18212694 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.10.2026. Verfasst von Furui Sun und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Electronics and Information Engineering, Tiangong University, Tianjin 300387, China. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Defense Basic Scientific Research program of China, Shanghai Cooperation Organization Science and Technology Partnership Program, International Science and Technology Cooperation Program Projects in the Autonomo…, Central Government Guided Local Science and Technology Development Fund Project of Hebei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-speed flight demands thermal protection materials combining lightweightness, high strength, efficient thermal insulation, and long-term oxidative ablation resistance. Herein, a ternary hybrid preceramic polymer system consisting of liquid polycarbosilane, polymethylhydrosiloxane, and 1,3,5,7-tetramethyl-1,3,5,7-tetravinylcyclotetrasiloxane was designed through precise control of molecular structure and polymerization kinetics. The composite precursor sol was infiltrated into a high-porosity needle-punched quartz fiber felt via the resin transfer molding method, yielding an integrated thermal protection/insulation material with a bulk density below 0.40 g cm−3. The resulting composite exhibited a thermal conductivity as low as 0.042 W m−1 K−1 at room temperature and 0.082 W m−1 K−1 at 1000 °C, along with a compressive strength of 7.97 MPa at 10% strain, demonstrating outstanding mechanical performance. In ground-based arc-jet ablation tests (500 MJ m−2, 1500 s, ~1400 °C surface), LHRC-05 showed a back-face temperature rise of only 160.5 °C across a 25 mm thick specimen, with a linear ablation rate as low as 0.53 μm s−1, accompanied by a mass ablation rate of 0.021 g s−1 (near-zero volumetric recession). These results demonstrated that the fiber-reinforced SiC/SiOC aerogel composite integrated low density, high mechanical strength with efficient thermal insulation and excellent ablation resistance, making it a promising candidate for thermal protection systems in aerospace applications.

Schlagwörter

Stichwörter der Autor:innen

SiC/SiOC aerogelablation resistancehigh-porosity needle-punched quartz fiber feltslightweightthermal insulationthermal protection

Autor:innen und Institutionen

  • School of Electronics and Information Engineering, Tiangong University, Tianjin 300387, China.
  • State Key Laboratory of Separation Membranes and Membrane Processes, School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China.

ORCID-Profile: Yi Liu, Liuchun Zheng

Förderung

  • the National Defense Basic Scientific Research program of China
  • Shanghai Cooperation Organization Science and Technology Partnership Program, International Science and Technology Cooperation Program Projects in the Autonomo…
  • Central Government Guided Local Science and Technology Development Fund Project of Hebei Province
  • S&T Program of Hebei
  • Natural Science Foundation of Tianjin
  • National Natural Science Foundation of China
  • Cangzhou Institute of Tiangong University

Zitieren

APA

Sun, F., Yu, Y., Wang, B., Liu, Y., & Zheng, L. (2026). Scalable Fabrication of Lightweight, Thermally Insulating and Ablation-Resistant SiC/SiOC Hybrid Aerogel Composites Reinforced with High-Porosity Needle-Punched Quartz Fiber Felts. Polymers, 18(21), 2694. https://doi.org/10.3390/polym18212694

Vancouver

Sun F, Yu Y, Wang B, Liu Y, Zheng L. Scalable Fabrication of Lightweight, Thermally Insulating and Ablation-Resistant SiC/SiOC Hybrid Aerogel Composites Reinforced with High-Porosity Needle-Punched Quartz Fiber Felts. Polymers. 2026;18(21):2694. doi:10.3390/polym18212694

BibTeX
@article{Sun2026,
  author = {Sun, Furui and Yu, Yang and Wang, Bing and Liu, Yi and Zheng, Liuchun},
  title = {Scalable Fabrication of Lightweight, Thermally Insulating and Ablation-Resistant SiC/SiOC Hybrid Aerogel Composites Reinforced with High-Porosity Needle-Punched Quartz Fiber Felts},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {21},
  pages = {2694},
  doi = {10.3390/polym18212694}
}
Kostenlos starten →