EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Polymer Matrix Type and Particle-Size Distribution on the Mechanical, Microstructural, and Thermal Behavior of Waste Tire Rubber Composites

Mehrzad Mohabbi iD, Canan Kaya Sahin

Polymers · 21.10.2026 · 18 (20) · 2599

DOI: 10.3390/polym18202599 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 21.10.2026. Verfasst von Mehrzad Mohabbi und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Faculty of Engineering, Bingöl University, 12000 Bingöl, Türkiye. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recycling ground tire rubber (GTR) into polymer-matrix composites requires accounting for both matrix formulation and rubber particle-size distribution. Here, polyurethane, epoxy, novolac–hexamine, and unsaturated polyester systems were compared using four gradations of the same rubber source (16 formulations). A common main-resin-to-rubber mass ratio of 20% was used; differences in required auxiliary components and curing conditions were explicitly considered. The 28-day reference compression results ranged from 1.22 to 1.35 MPa for the polyester formulations to 8.21 MPa for epoxy–K1; epoxy–K1 also reached 2.21 MPa in flexure, whereas polyurethane–K4 reached 6.29 MPa in compression and 1.94 MPa in flexure. Thirteen available compression curves were reprocessed using the 70 × 50 mm loaded face and 70 mm loading length; derived deformation and work-density parameters are apparent, machine-displacement-based measures. Binder-specific UPV trends were exploratory (four gradations per binder). Selected SEM/EDS, ATR-FTIR, and representative TGA/DTG data supplied complementary evidence without establishing interfacial chemical bonding, cure inhibition, or fire performance. The results indicate formulation-dependent strength–deformation trade-offs within the tested materials rather than a universal optimum matrix or gradation.

Schlagwörter

Stichwörter der Autor:innen

epoxynovolac–hexamineparticle-size distributionpolymer compositespolyurethanestructure-property relationshipsunsaturated polyesterwaste tire rubber

Autor:innen und Institutionen

  • Department of Civil Engineering, Faculty of Engineering, Bingöl University, 12000 Bingöl, Türkiye.

ORCID-Profile: Mehrzad Mohabbi

Zitieren

APA

Mohabbi, M., & Sahin, C. K. (2026). Effect of Polymer Matrix Type and Particle-Size Distribution on the Mechanical, Microstructural, and Thermal Behavior of Waste Tire Rubber Composites. Polymers, 18(20), 2599. https://doi.org/10.3390/polym18202599

Vancouver

Mohabbi M, Sahin CK. Effect of Polymer Matrix Type and Particle-Size Distribution on the Mechanical, Microstructural, and Thermal Behavior of Waste Tire Rubber Composites. Polymers. 2026;18(20):2599. doi:10.3390/polym18202599

BibTeX
@article{Mohabbi2026,
  author = {Mohabbi, Mehrzad and Sahin, Canan Kaya},
  title = {Effect of Polymer Matrix Type and Particle-Size Distribution on the Mechanical, Microstructural, and Thermal Behavior of Waste Tire Rubber Composites},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {20},
  pages = {2599},
  doi = {10.3390/polym18202599}
}
Kostenlos starten →