Quantum Dot-Hybridized Temperature- and Salt-Resistant Polyacrylamide for Enhanced Oil Recovery in High-Temperature and High-Salinity Reservoirs
Polymers · 28.08.2026 · 18 (17) · 2084
DOI: 10.3390/polym18172084 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 28.08.2026. Verfasst von Hua Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: Xi'an Changqing Chemical Group Co., Ltd., Xi'an 710200, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Conventional partially hydrolyzed polyacrylamide (HPAM) suffers severe chain coiling, viscosity attenuation and precipitation under high-temperature and high-salinity reservoir brines, restricting its tertiary oil recovery efficiency. Herein, a novel carbon quantum dot hybrid terpolymer (QDHSTP) was synthesized via free-radical copolymerization, where silane-modified nitrogen-doped carbon quantum dots (FNCQDs) were covalently bonded to acrylamide (AM)/2-acrylamido-2-methylpropane sulfonic acid (AMPS)/diallyldimethylammonium chloride (DMDAAC) backbones. FTIR, 1H NMR and thermogravimetric analysis (TGA) verified successful grafting of FNCQDs, while SEM revealed a continuous three-dimensional entangled network constructed by polymer chains. Steady and oscillatory rheology systematically characterized the solution viscoelasticity: QDHSTP solutions followed the power-law shear-thinning model, with flow behavior index n decreasing from 0.698 to 0.676 and consistency factor k rising from 80.91 to 131.13 mPa·sn as concentration increased from 2000 to 3000 mg/L. All samples behaved as viscosity-dominated viscoelastic fluids, with elastic modulus exhibiting stronger frequency dependence. Benefiting from embedded FNCQDs, QDHSTP retained 79.74% and 76.06% of initial viscosity in 1.0 × 104 mg/L NaCl and CaCl2 brine, respectively, markedly better than that of the polymer without incorporated FNCQDs respectively, and maintained thickening capacity at 90 °C. Artificial sandstone core flooding demonstrated an incremental oil recovery of 29.8% over baseline waterflooding, attributed to mobility control and elastic residual oil stripping. This covalent nanohybrid strategy provides a facile route to construct thermo-salt tolerant polyacrylamides, offering a promising candidate polymer for harsh oil reservoir chemical flooding.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Xi'an Changqing Chemical Group Co., Ltd., Xi'an 710200, China.
- Engineering Technology Department, PetroChina Xinjiang Oilfield Company, Karamay 834000, China.
- State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, China.
- School of Petroleum and Natural Gas Engineering, Chongqing University of Science and Technology, Chongqing 401331, China.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, H., He, J., Jing, R., Wang, S., Li, A., Chen, T., Du, D., & Zhang, S. (2026). Quantum Dot-Hybridized Temperature- and Salt-Resistant Polyacrylamide for Enhanced Oil Recovery in High-Temperature and High-Salinity Reservoirs. Polymers, 18(17), 2084. https://doi.org/10.3390/polym18172084
Vancouver
Li H, He J, Jing R, Wang S, Li A, Chen T, et al. Quantum Dot-Hybridized Temperature- and Salt-Resistant Polyacrylamide for Enhanced Oil Recovery in High-Temperature and High-Salinity Reservoirs. Polymers. 2026;18(17):2084. doi:10.3390/polym18172084
BibTeX
@article{Li2026,
author = {Li, Hua and He, Jingjing and Jing, Rui and Wang, Song and Li, Aihui and Chen, Ting and Du, Daijun and Zhang, Suhan},
title = {Quantum Dot-Hybridized Temperature- and Salt-Resistant Polyacrylamide for Enhanced Oil Recovery in High-Temperature and High-Salinity Reservoirs},
journal = {Polymers},
year = {2026},
volume = {18},
number = {17},
pages = {2084},
doi = {10.3390/polym18172084}
}
EUVIMED