Simulation-Oriented Rule-Driven Geometric Modeling of Polymer-Fiber Weft-Knitted Structures for Moisture-Transfer Prediction
Polymers · 21.08.2026 · 18 (16) · 2026
DOI: 10.3390/polym18162026 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.08.2026. Verfasst von Miao Miao und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Textile Science and Engineering, Tiangong University, No. 399 Binshui Xi Road, Xiqing District, Tianjin 300387, China. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Hebei Natural Science Foundation, Cangzhou Natural Science Foundation, China Scholarship Council.
Abstract (Originalsprache)
Polymer-fiber weft-knitted textiles are widely used in functional apparel and moisture-management materials, but their complex loop topology, yarn-level porosity, and interlayer hierarchy make simulation-oriented geometric modeling challenging. Conventional control-point and interpolated-curve methods often have limitations in representing knitting actions, maintaining yarn-path continuity, and generating meshable geometries. This study proposes a rule-driven geometric modeling method for polymer-fiber weft-knitted structures using the yarn centerline as the basic geometric carrier. Knitting actions, including knit, tuck, float, plating, and double-needle-bed assignment, are converted into reusable local path-generation rules and integrated through pattern-matrix input, action recognition, parametric centerline generation, continuous stitching, and standardized output. The method represents single-bed and double-bed structures within a unified framework, including plain, jacquard, plated, tuck, rib, interlock, half-cardigan, full-cardigan, and purl structures. Compared with an interpolated-curve method, the curvature-jump rate of four representative structures decreases from 40.78–69.23% to 0–0.31%, with markedly reduced maximum bending angles. Mesh-generation results show continuous meshes with improved element quality for complex double-bed structures. A moisture-transfer simulation of a fully plated plain-knitted structure gives one-way transport indices of −122.3187 and 122.2472 for face- and back-side liquid entry, with relative errors of 1.74% and 0.50% compared with experiments. These results indicate that the proposed method provides reproducible and meshable geometric input for structure–property modeling and moisture-transfer prediction of polymer-fiber knitted textiles.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Textile Science and Engineering, Tiangong University, No. 399 Binshui Xi Road, Xiqing District, Tianjin 300387, China.
- Cangzhou Institute of Tiangong University, Cangzhou 061000, China.
- State Key Laboratory of Precision Measuring Technology and Instruments, Laboratory of Micro/Nano Manufacturing Technology, Tianjin University, Tianjin 300072, China.
ORCID-Profile: Tianqi Yang
Förderung
- Hebei Natural Science Foundation
- Cangzhou Natural Science Foundation
- China Scholarship Council
Zitieren
APA
Miao, M., Li, N., Zhang, H., Tang, Y., Yang, T., & Zhang, X. (2026). Simulation-Oriented Rule-Driven Geometric Modeling of Polymer-Fiber Weft-Knitted Structures for Moisture-Transfer Prediction. Polymers, 18(16), 2026. https://doi.org/10.3390/polym18162026
Vancouver
Miao M, Li N, Zhang H, Tang Y, Yang T, Zhang X. Simulation-Oriented Rule-Driven Geometric Modeling of Polymer-Fiber Weft-Knitted Structures for Moisture-Transfer Prediction. Polymers. 2026;18(16):2026. doi:10.3390/polym18162026
BibTeX
@article{Miao2026,
author = {Miao, Miao and Li, Nana and Zhang, Hao and Tang, Yuxiao and Yang, Tianqi and Zhang, Xiaodong},
title = {Simulation-Oriented Rule-Driven Geometric Modeling of Polymer-Fiber Weft-Knitted Structures for Moisture-Transfer Prediction},
journal = {Polymers},
year = {2026},
volume = {18},
number = {16},
pages = {2026},
doi = {10.3390/polym18162026}
}
EUVIMED