EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Recycled Automotive and Construction Wastes in Three-Layer Particleboards: Thermophysical Properties, Sound Absorption, and Radiant-Heat Mass-Loss Behavior

Rupali Tiwari iD, Anna Darabošová iD, Iveta Čabalová, Miroslav Němec iD, Martin Zachar iD, Tereza Jurczyková iD, Lubos Kristak iD

Polymers · 17.08.2026 · 18 (16) · 1997

DOI: 10.3390/polym18161997 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.08.2026. Verfasst von Rupali Tiwari und 6 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Wood Sciences and Technology, Technical University in Zvolen, T. G. Masaryka 24, 960 01 Zvolen, Slovakia. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Slovak Academy of Sciences, Ministry of Education, Research, Development and Youth of the Slovak Republic, Slovak Research and Development Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Recycled polymer-rich residues can alter several functions of wood-based panels, but claims of multifunctionality require property-specific evidence and transparent treatment of replication. Three-layer spruce particleboards were therefore prepared with 10 wt.% painted or unpainted polypropylene bumper granules, high-density polyethylene fuel-tank granules, tire rubber, seal-and-carpet residues, or electrical-cable fractions in the core layer. Two hybrid formulations contained 10 wt.% recycled rubber-rich filler plus 10 wt.% expandable graphite. Transient plane source measurements were evaluated at the specimen-pair level (two pairs per formulation); normal-incidence sound absorption and radiant-heat mass loss were complementary descriptive screens because the archived datasets contained one spectrum or one exposed specimen per formulation. Mean thermal conductivity varied only from 0.1908 to 0.2075 W m−1 K−1 (−5.3% to +3.0% relative to the reference). The graphite hybrids showed the clearest change in transient response: thermal diffusivity increased by 19.6–20.1%, whereas volumetric heat capacity decreased by 14.5–16.7% and thermal effusivity by 6.5–8.7%. SC10G10 had the highest mean absorption coefficient over 126–6400 Hz (0.210; +46.2%) and the lowest mass loss after 600 s at 30 kW m−2 (37.48%; −17.72%). Macroscopic and polarizing optical images showed formulation-dependent filler distribution and visible interfacial spaces, but they did not establish bonding mechanisms or quantify porosity. The results identify promising formulation-dependent responses while also defining the replication and structural measurements needed before application-level claims can be made.

Schlagwörter

Stichwörter der Autor:innen

electrical-cable wasteparticleboardpolarizing optical microscopyradiant heatrecycled automotive plasticssound absorptionthermal diffusivitytransient plane sourcewaste rubber

Autor:innen und Institutionen

  • Faculty of Wood Sciences and Technology, Technical University in Zvolen, T. G. Masaryka 24, 960 01 Zvolen, Slovakia.
  • Institute of Physics, Slovak Academy of Sciences, Dúbravská cesta 9, 845 11 Bratislava, Slovakia.
  • Faculty of Forestry and Wood Sciences, Czech University of Life Sciences Prague, Kamýcká 1176, 165 21 Prague, Czech Republic.
  • Academy of Fine Arts in Prague, Painted Artworks and Polychrome Statues Restoration, U Akademie 4, 170 00 Prague, Czech Republic.

ORCID-Profile: Rupali Tiwari, Anna Darabošová, Miroslav Němec, Martin Zachar, Tereza Jurczyková, Lubos Kristak

Förderung

  • Slovak Academy of Sciences
  • Ministry of Education, Research, Development and Youth of the Slovak Republic
  • Slovak Research and Development Agency
  • UNIVNET, “University Research Association for Waste Recovery, especially from the Automotive Industry”

Zitieren

APA

Tiwari, R., Darabošová, A., Čabalová, I., Němec, M., Zachar, M., Jurczyková, T., & Kristak, L. (2026). Recycled Automotive and Construction Wastes in Three-Layer Particleboards: Thermophysical Properties, Sound Absorption, and Radiant-Heat Mass-Loss Behavior. Polymers, 18(16), 1997. https://doi.org/10.3390/polym18161997

Vancouver

Tiwari R, Darabošová A, Čabalová I, Němec M, Zachar M, Jurczyková T, et al. Recycled Automotive and Construction Wastes in Three-Layer Particleboards: Thermophysical Properties, Sound Absorption, and Radiant-Heat Mass-Loss Behavior. Polymers. 2026;18(16):1997. doi:10.3390/polym18161997

BibTeX
@article{Tiwari2026,
  author = {Tiwari, Rupali and Darabošová, Anna and Čabalová, Iveta and Němec, Miroslav and Zachar, Martin and Jurczyková, Tereza and Kristak, Lubos},
  title = {Recycled Automotive and Construction Wastes in Three-Layer Particleboards: Thermophysical Properties, Sound Absorption, and Radiant-Heat Mass-Loss Behavior},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {16},
  pages = {1997},
  doi = {10.3390/polym18161997}
}
Kostenlos starten →