Upcycling Waste Expanded Polystyrene into Fe@Graphitic-Carbon Catalysts for Glycolytic Recycling of PET to BHET
Polymers · 14.08.2026 · 18 (16) · 1983
DOI: 10.3390/polym18161983 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 14.08.2026. Verfasst von Jong In Choi und 5 weiteren Autor:innen. Beteiligte Einrichtung: Research Center for Nanocatalysts, Korea Research Institute of Chemical Technology (KRICT), 141 Gajeong-ro, Yuseong, Daejeon 34114, Republic of Korea. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Council of Science and Technology, National Research Foundation of Korea, National Research Council of Science & Technology.
Abstract (Originalsprache)
Chemical glycolysis can convert waste poly(ethylene terephthalate) (PET) into bis(2-hydroxyethyl) terephthalate (BHET), but recyclable heterogeneous catalysts derived from circular carbon sources and showing low metal release remain limited. Here, post-consumer expanded polystyrene (EPS) was transformed into a hypercrosslinked polymer (HCP) and carbonized with Fe to produce Fe@graphitic-carbon (Fe@C) catalysts for PET glycolysis. The catalysts are denoted mFe@EPS-HCP800, where m represents the nominal Fe loading (wt.%), and 800 is the carbonization temperature (°C). The optimized 5Fe@EPS-HCP800 contained graphitic carbon layers, bamboo-like carbon nanotube (CNT) domains, hierarchical porosity, and Fe-rich domains associated with graphitic carbon coverage. Under atmospheric-pressure conditions (PET, 2.00 g; ethylene glycol, 20.00 g; catalyst, 0.20 g; 200 °C; 2 h), it achieved complete PET conversion and 94.6% BHET yield. The catalyst also maintained BHET yields of ca. 90–94% over ten reuse runs, and post-reaction microscopy confirmed the retention of graphitic carbon layers and Fe-containing domains. Fe was below the detection limit in the product solutions for the 1, 3, and 5 wt.% Fe catalysts, whereas 7Fe@EPS-HCP800 released 9.1 mg kg−1 Fe, consistent with incomplete carbon coverage at excessive Fe loading. Conversion profiles followed an Avrami–Erofeev/Weibull model, giving an apparent activation energy of 205.6 kJ mol−1. The data support a two-stage pathway in which external graphitic carbon/CNT domains promote primary PET chain scission to soluble oligomers, followed by Fe@C interfacial secondary glycolysis to BHET. This work demonstrates dual waste-polymer valorization by using EPS waste as catalytic infrastructure for PET chemical recycling.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Research Center for Nanocatalysts, Korea Research Institute of Chemical Technology (KRICT), 141 Gajeong-ro, Yuseong, Daejeon 34114, Republic of Korea.
- Department of Chemical and Biomolecular Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-gu, Seoul 03722, Republic of Korea.
- Department of Advanced Materials and Chemical Engineering, University of Science and Technology (UST), Yuseong-gu, Daejeon 34113, Republic of Korea.
ORCID-Profile: Jong In Choi
Förderung
- National Research Council of Science and Technology
- National Research Foundation of Korea
- National Research Council of Science & Technology
Zitieren
APA
Choi, J. I., Sarkar, C., Kang, Y., Kanwal, S., Bae, Y. S., & Hong, D. Y. (2026). Upcycling Waste Expanded Polystyrene into Fe@Graphitic-Carbon Catalysts for Glycolytic Recycling of PET to BHET. Polymers, 18(16), 1983. https://doi.org/10.3390/polym18161983
Vancouver
Choi JI, Sarkar C, Kang Y, Kanwal S, Bae YS, Hong DY. Upcycling Waste Expanded Polystyrene into Fe@Graphitic-Carbon Catalysts for Glycolytic Recycling of PET to BHET. Polymers. 2026;18(16):1983. doi:10.3390/polym18161983
BibTeX
@article{Choi2026,
author = {Choi, Jong In and Sarkar, Chitra and Kang, Yujin and Kanwal, Saira and Bae, Youn-Sang and Hong, Do-Young},
title = {Upcycling Waste Expanded Polystyrene into Fe@Graphitic-Carbon Catalysts for Glycolytic Recycling of PET to BHET},
journal = {Polymers},
year = {2026},
volume = {18},
number = {16},
pages = {1983},
doi = {10.3390/polym18161983}
}
EUVIMED