EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Achieving High Strength and Modulus in Bamboo/Glass Fiber Hybrid Composites Enabled by Synergistic Interfacial Design

Jian Sun, Zhihui Li, Anqi Li, Sudong Hua, Xin Yang

Polymers · 14.08.2026 · 18 (16) · 1982

DOI: 10.3390/polym18161982 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 14.08.2026. Verfasst von Jian Sun und 4 weiteren Autor:innen. Beteiligte Einrichtung: College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, China. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hybrid composites combining natural and synthetic fibers offer a pathway to sustainable structural materials, yet their performance is often limited by weak interfacial bonding and mechanical mismatches between constituents. Here, we address these challenges in bamboo/glass fiber hybrid epoxy composites through a sequential alkali and silane surface modification strategy. Alkali treatment removes amorphous lignin and hemicellulose, creating a roughened, cellulose-rich surface; subsequent grafting with (3-aminopropyl) triethoxysilane introduces an amino-functionalized interphase that covalently bonds with the epoxy matrix. This combined treatment increases the tensile strength of bamboo fibers by 51.2% and the interfacial shear strength by 136.6%, reaching values comparable to those of commercial glass fibers. The resulting hybrid composite exhibits a tensile strength of 485 MPa and a flexural modulus of 30.2 GPa, corresponding to improvements of 39.4% and 98.3%, respectively, over the unmodified hybrid system. Dynamic mechanical analysis further confirms an enhanced storage modulus across a wide temperature range. This work demonstrates that rational interfacial design via sequential functionalization offers a viable route to high-performance, lightweight, and structurally stable bamboo/glass fiber hybrid composites for sustainable engineering applications, such as reusable concrete formwork.

Schlagwörter

Stichwörter der Autor:innen

hybrid compositesinterfacial adhesionmechanical propertiessynergistic interfacial design

Autor:innen und Institutionen

  • College of Materials Science and Engineering, Nanjing Tech University, Nanjing 211816, China.

Zitieren

APA

Sun, J., Li, Z., Li, A., Hua, S., & Yang, X. (2026). Achieving High Strength and Modulus in Bamboo/Glass Fiber Hybrid Composites Enabled by Synergistic Interfacial Design. Polymers, 18(16), 1982. https://doi.org/10.3390/polym18161982

Vancouver

Sun J, Li Z, Li A, Hua S, Yang X. Achieving High Strength and Modulus in Bamboo/Glass Fiber Hybrid Composites Enabled by Synergistic Interfacial Design. Polymers. 2026;18(16):1982. doi:10.3390/polym18161982

BibTeX
@article{Sun2026,
  author = {Sun, Jian and Li, Zhihui and Li, Anqi and Hua, Sudong and Yang, Xin},
  title = {Achieving High Strength and Modulus in Bamboo/Glass Fiber Hybrid Composites Enabled by Synergistic Interfacial Design},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {16},
  pages = {1982},
  doi = {10.3390/polym18161982}
}
Kostenlos starten →