EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Process Parameter Optimization and Straightness Error Prediction in FDM Based on PB-CCF Design

Li Yang iD, Tianlu Wei, Pei Li, Jing Zhao iD

Polymers · 10.08.2026 · 18 (16) · 1954

DOI: 10.3390/polym18161954 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.08.2026. Verfasst von Li Yang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Vehicle Engineering, Bengbu University, Bengbu 233000, China. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Bengbu University, Bengbu University Scientific Research Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fused deposition modeling (FDM) involves numerous process parameters, making it difficult to efficiently identify key influencing factors and achieve accurate prediction of straightness errors in printed parts. To address these issues, this paper proposes a two-stage experimental optimization and prediction method combining Plackett–Burman (PB) design and central composite design (CCD). First, PB experiments were conducted to screen nine process parameters and identify two significant factors affecting straightness error: layer height and line width. Subsequently, a face-centered central composite design (CCF) was employed to establish a quadratic response surface regression model for analyzing the main effects and interaction effects of the selected factors. Based on 18 sets of CCF experimental data, response surface methodology (RSM) and decision tree–genetic algorithm (DT + GA) prediction models were constructed, and their generalization capabilities were evaluated using five independent reserved experiments. The results show that the quadratic regression model exhibits a coefficient of variation of 2.21% and a signal-to-noise ratio of 45.45, indicating good fitting accuracy. On the test set, RSM achieves a mean squared error (MSE) of 7.29 × 10−6 mm2 and a mean absolute error (MAE) of 0.002142 mm, both superior to the DT + GA model (MSE = 3.41 × 10−5 mm2, MAE = 0.004578 mm), representing reductions of 78.6% in MSE and 53.2% in MAE. This validates the effectiveness and superiority of the CCF-based response surface method for straightness error prediction under small-sample conditions. The proposed strategy provides a quantitative reference for the control of shape accuracy and process optimization in FDM-printed parts.

Schlagwörter

Stichwörter der Autor:innen

CCFPlackett-Burman designdecision tree-genetic algorithmfused deposition modelingresponse surface methodologystraightness error

Autor:innen und Institutionen

  • School of Mechanical and Vehicle Engineering, Bengbu University, Bengbu 233000, China.

ORCID-Profile: Li Yang, Jing Zhao

Förderung

  • Bengbu University
  • Bengbu University Scientific Research Project

Zitieren

APA

Yang, L., Wei, T., Li, P., & Zhao, J. (2026). Process Parameter Optimization and Straightness Error Prediction in FDM Based on PB-CCF Design. Polymers, 18(16), 1954. https://doi.org/10.3390/polym18161954

Vancouver

Yang L, Wei T, Li P, Zhao J. Process Parameter Optimization and Straightness Error Prediction in FDM Based on PB-CCF Design. Polymers. 2026;18(16):1954. doi:10.3390/polym18161954

BibTeX
@article{Yang2026,
  author = {Yang, Li and Wei, Tianlu and Li, Pei and Zhao, Jing},
  title = {Process Parameter Optimization and Straightness Error Prediction in FDM Based on PB-CCF Design},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {16},
  pages = {1954},
  doi = {10.3390/polym18161954}
}
Kostenlos starten →