Bilayer Scaffold for Corneal Stromal Engineering: Solvent-Cast Polyvinyl Alcohol/Sodium Alginate and Electrospun Aligned Polycaprolactone Fibers
Polymers · 06.08.2026 · 18 (15) · 1928
DOI: 10.3390/polym18151928 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 06.08.2026. Verfasst von Amin Orash Mahmoudsalehi und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry and Nanotechnology, School of Engineering and Science, Tecnologico de Monterrey, Monterrey 64849, Nuevo Leon, Mexico. Die Arbeit nennt 126 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Sciences, Humanities, Technology and Innovation, SECIHTI.
Abstract (Originalsprache)
Due to their limited functional range, single-layer engineered scaffolds often fall short of meeting the complex clinical requirements for corneal stromal engineering (CSE). To overcome these challenges, bilayer constructs that integrate complementary material properties have emerged as promising alternatives. In this study, we developed a bilayer membrane by electrospinning polycaprolactone (PCL) fibers onto a solvent-cast polyvinyl alcohol/sodium alginate (PVS) membrane. The dense PVS layer provided a smooth, crack-free surface with favorable physicochemical and thermal stability. In contrast, the PCL nanofibrous layer (232 ± 44 nm) exhibited a continuous, bead-free, and highly aligned morphology. Comprehensive characterization confirmed the structural integrity of the bilayer scaffold, which showed two distinct thermal transitions (~65 °C for PCL and ~225 °C for PVS), confirming good stability and minimal interfacial disruption. Functionally, the PCL–PVS bilayer scaffold demonstrated an intermediate contact angle (57.44°), high water uptake capacity (424.44%), and a high gel fraction (96.12%), along with controlled biodegradation (39.65%), highlighting its suitability for physiological environments. Mechanical testing revealed a Young’s modulus of 2.60 ± 0.20 megapascals (MPa), an ultimate tensile strength (UTS) of 5.74 ± 0.02 MPa, and an elongation at break of 3.32 ± 0.10%, values well aligned with the mechanical demands of corneal tissue. Additionally, the construct achieved 85.01% light transmittance, essential for visual clarity, and supported measurable cell viability, although additional optimization is required to further enhance cytocompatibility. These findings demonstrate that the bilayer combines structural stability, favorable physicochemical performance, transparency, and biological compatibility, positioning it as a promising platform for further optimization toward CSE.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemistry and Nanotechnology, School of Engineering and Science, Tecnologico de Monterrey, Monterrey 64849, Nuevo Leon, Mexico.
- School of Medicine and Health Sciences, Tecnologico de Monterrey, Monterrey 64849, Nuevo Leon, Mexico.
ORCID-Profile: Amin Orash Mahmoudsalehi, Kevin Stalin Catzim Rios, Carlos Enrique Guerrero-Beltrán, Wendy Ortega-Lara
Förderung
- Ministry of Sciences, Humanities, Technology and Innovation
- SECIHTI
Zitieren
APA
Orash Mahmoudsalehi, A., Rios, K. S. C., Guerrero-Beltrán, C. E., & Ortega-Lara, W. (2026). Bilayer Scaffold for Corneal Stromal Engineering: Solvent-Cast Polyvinyl Alcohol/Sodium Alginate and Electrospun Aligned Polycaprolactone Fibers. Polymers, 18(15), 1928. https://doi.org/10.3390/polym18151928
Vancouver
Orash Mahmoudsalehi A, Rios KSC, Guerrero-Beltrán CE, Ortega-Lara W. Bilayer Scaffold for Corneal Stromal Engineering: Solvent-Cast Polyvinyl Alcohol/Sodium Alginate and Electrospun Aligned Polycaprolactone Fibers. Polymers. 2026;18(15):1928. doi:10.3390/polym18151928
BibTeX
@article{OrashMahmoudsalehi2026,
author = {Orash Mahmoudsalehi, Amin and Rios, Kevin Stalin Catzim and Guerrero-Beltrán, Carlos Enrique and Ortega-Lara, Wendy},
title = {Bilayer Scaffold for Corneal Stromal Engineering: Solvent-Cast Polyvinyl Alcohol/Sodium Alginate and Electrospun Aligned Polycaprolactone Fibers},
journal = {Polymers},
year = {2026},
volume = {18},
number = {15},
pages = {1928},
doi = {10.3390/polym18151928}
}
EUVIMED