EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Exploration of Properties and Characterization of Nerium oleander L. Plant Stem Fibers and Their Polymer Composites

M Ramesh iD, M Tamil Selvan iD, A Felix Sahayaraj iD, P Ramya iD, C Deepa, M Sathishkumar iD

Polymers · 05.08.2026 · 18 (15) · 1921

DOI: 10.3390/polym18151921 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 05.08.2026. Verfasst von M Ramesh und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Sri Shanmugha College of Engineering and Technology, Salem 637304, Tamil Nadu, India. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 107 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to investigate the physicochemical properties and composites of a novel cellulosic fiber extracted from Nerium oleander L. plant stem. Nerium oleander fibers (NOFs) were separated from mature oleander plants using a microbial degradation technique, and their composites (NOFCs) were fabricated using a compression molding technique. The chemical composition, physical and thermal behavior of NOFs, and mechanical and water absorption properties of NOFs and NOFCs were investigated. The findings show that NOFs have a cellulose content of 57%, hemicellulose content of 13%, lignin content of 16%, density of 1.46 g/cc, and crystallinity index (CI) of 57.14%. The results further revealed that NOFs had a tensile strength of 438 MPa and a strain rate of 1.8%, whereas NOFCs had a maximum tensile strength of 58.42 MPa. NOFs can withstand temperatures up to 357 °C, according to a thermogravimetric study, and the functional groups were analyzed using Fourier-transform infrared (FTIR) spectroscopy. Scanning electron microscopy (SEM) studies showed that the surface morphology and fractured surfaces of the NOFs and their composites were smooth and circular in cross-section.

Schlagwörter

Stichwörter der Autor:innen

Fourier transform infra-red analysisNerium oleander fiberchemical compositionmechanical propertiespolymer compositesthermo-gravimetry analysis

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Sri Shanmugha College of Engineering and Technology, Salem 637304, Tamil Nadu, India.
  • Centre for Advanced Materials and Testing, Department of Mechanical Engineering, Sri Eshwar College of Engineering, Coimbatore 641202, Tamil Nadu, India.
  • Department of Mechanical Engineering, KIT-Kalaignarkarunanidhi Institute of Technology, Coimbatore 641402, Tamil Nadu, India.
  • Department of Computer Science and Engineering, Mahendra Engineering College, Namakkal 637503, Tamil Nadu, India.
  • Department of Computer Science and Engineering, Adithya Institute of Technology, Coimbatore 641107, Tamil Nadu, India.
  • Department of Mechanical Engineering, Amrita School of Engineering, Amrita Vishwa Vidyapeetham, Chennai 601103, Tamil Nadu, India.

ORCID-Profile: M Ramesh, M Tamil Selvan, A Felix Sahayaraj, P Ramya, M Sathishkumar

Zitieren

APA

Ramesh, M., Tamil Selvan, M., Sahayaraj, A. F., Ramya, P., Deepa, C., & Sathishkumar, M. (2026). Experimental Exploration of Properties and Characterization of Nerium oleander L. Plant Stem Fibers and Their Polymer Composites. Polymers, 18(15), 1921. https://doi.org/10.3390/polym18151921

Vancouver

Ramesh M, Tamil Selvan M, Sahayaraj AF, Ramya P, Deepa C, Sathishkumar M. Experimental Exploration of Properties and Characterization of Nerium oleander L. Plant Stem Fibers and Their Polymer Composites. Polymers. 2026;18(15):1921. doi:10.3390/polym18151921

BibTeX
@article{Ramesh2026,
  author = {Ramesh, M and Tamil Selvan, M and Sahayaraj, A Felix and Ramya, P and Deepa, C and Sathishkumar, M},
  title = {Experimental Exploration of Properties and Characterization of Nerium oleander L. Plant Stem Fibers and Their Polymer Composites},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {15},
  pages = {1921},
  doi = {10.3390/polym18151921}
}
Kostenlos starten →