EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

One-Step Preparation of Silk Fibroin and Sericin from Silkworm Cocoons Using High-Temperature High-Pressure Treatment

Yeon Jin Kim, Bo Kyung Park, Ick Soo Kim iD, In Chul Um iD

Polymers · 05.08.2026 · 18 (15) · 1919

DOI: 10.3390/polym18151919 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 05.08.2026. Verfasst von Yeon Jin Kim und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Biofibers and Biomaterials Science, Kyungpook National University, Daegu 41566, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Ministry of Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional silk degumming processes are primarily designed to recover either silk fibroin (SF) or sericin, resulting in inefficient utilization of silk resources and substantial sericin waste. In this study, a one-step high-temperature high-pressure (HTHP) process was developed for the simultaneous preparation of SF and sericin from silkworm cocoons. To determine the optimum processing conditions, HTHP treatment was performed at 120 °C for 10, 20, and 30 min. The effects of treatment time on the degumming efficiency and the physicochemical properties of SF and sericin were systematically investigated through the characterization of SF as degummed fibers, regenerated solutions, and electrospun fibers, and sericin as solutions and gels. Complete degumming was achieved after 10 min of HTHP treatment, corresponding to a degumming ratio of 25.4%, with no further increase at longer treatment times. While complete degumming was maintained beyond 10 min, prolonged treatment progressively deteriorated the physicochemical properties of sericin and eventually reduced the molecular integrity of SF, as consistently demonstrated across the different material forms. Compared with the conventional soap/soda method, the HTHP process better preserved the molecular integrity of SF while simultaneously recovering an aqueous sericin fraction without chemical degumming. Based on the degumming efficiency and the physicochemical properties of both silk proteins, 10 min was identified as the optimum HTHP treatment time for the simultaneous preparation of SF and sericin. This one-step HTHP process provides a simple and efficient process for improving silk resource utilization and facilitating the industrial production of SF and sericin-based biomaterials.

Schlagwörter

Stichwörter der Autor:innen

HTHP methodfibroinsericinsilk biomaterialssimultaneous preparation

Autor:innen und Institutionen

  • Department of Biofibers and Biomaterials Science, Kyungpook National University, Daegu 41566, Republic of Korea.
  • Institute for Fiber Engineering and Science (IFES), Research Cluster for Social Implementation, Shinshu University, Nagano 386-8567, Japan.

ORCID-Profile: Ick Soo Kim, In Chul Um

Förderung

  • National Research Foundation of Korea
  • Ministry of Education

Zitieren

APA

Kim, Y. J., Park, B. K., Kim, I. S., & Um, I. C. (2026). One-Step Preparation of Silk Fibroin and Sericin from Silkworm Cocoons Using High-Temperature High-Pressure Treatment. Polymers, 18(15), 1919. https://doi.org/10.3390/polym18151919

Vancouver

Kim YJ, Park BK, Kim IS, Um IC. One-Step Preparation of Silk Fibroin and Sericin from Silkworm Cocoons Using High-Temperature High-Pressure Treatment. Polymers. 2026;18(15):1919. doi:10.3390/polym18151919

BibTeX
@article{Kim2026,
  author = {Kim, Yeon Jin and Park, Bo Kyung and Kim, Ick Soo and Um, In Chul},
  title = {One-Step Preparation of Silk Fibroin and Sericin from Silkworm Cocoons Using High-Temperature High-Pressure Treatment},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {15},
  pages = {1919},
  doi = {10.3390/polym18151919}
}
Kostenlos starten →