EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Reuse of Uncured Carbon Fiber Prepreg Scrap via Calendering for Circular Composite Manufacturing

Mónica Peñas-Caballero iD, Fernando Ramos Delgado, Víctor Gregorio iD, Eunice Cunha iD, María Ariño, Martín Bergaño Guzmán iD, Noelia Salmerón Pérez, Tamara Blanco Varela, Juan P Fernández-Blázquez iD, Álvaro C Casanova

Polymers · 25.07.2026 · 18 (15) · 1824

DOI: 10.3390/polym18151824 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.07.2026. Verfasst von Mónica Peñas-Caballero und 9 weiteren Autor:innen. Beteiligte Einrichtung: Foundation for the Research, Development and Application of Composite Materials (FIDAMC), Avenida Rita Levi Montalcini 29, Tecnogetafe, 28906 Getafe,…. Die Arbeit nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Clean Aviation, European Union, Clean Aviation Joint Undertaking.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This technical study presents calendering as an innovative and continuous industrial solution for the reuse of uncured carbon fiber prepreg scraps, which are typically discarded in large quantities in the aerospace sector. By applying heat and pressure through rollers, the authors successfully transform residual fragments into functional sheets, promoting a circular economy that reduces environmental impact and raw material costs. Although the process induces a slight fiber misalignment, which decreases longitudinal strength, the results reveal significant improvements in transverse properties and increased material isotropy. Finally, the research validates the feasibility of this technique by fabricating a curved structural demonstrator, proving that these recycled composites maintain high stiffness and suitable thermal stability for secondary aeronautical applications.

Schlagwörter

Stichwörter der Autor:innen

2D X-Ray diffractioncalenderingcarbon fiberfiber orientationprepreguncured prepreg scrap

Autor:innen und Institutionen

  • Foundation for the Research, Development and Application of Composite Materials (FIDAMC), Avenida Rita Levi Montalcini 29, Tecnogetafe, 28906 Getafe, Madrid, Spain.
  • IMDEA Materials Institute, C/Eric Kandel 2, 28906 Getafe, Madrid, Spain.
  • AIRBUS Operations S.L., Paseo John Lennon s/n, 28906 Getafe, Madrid, Spain.

ORCID-Profile: Mónica Peñas-Caballero, Víctor Gregorio, Eunice Cunha, Martín Bergaño Guzmán, Juan P Fernández-Blázquez

Förderung

  • Clean Aviation
  • European Union
  • Clean Aviation Joint Undertaking
  • European Union’s Horizon Europe research and innovation program
  • MC4 project

Zitieren

APA

Peñas-Caballero, M., Delgado, F. R., Gregorio, V., Cunha, E., Ariño, M., Bergaño Guzmán, M., Salmerón Pérez, N., Blanco Varela, T., Fernández-Blázquez, J. P., & Casanova, Á. C. (2026). Reuse of Uncured Carbon Fiber Prepreg Scrap via Calendering for Circular Composite Manufacturing. Polymers, 18(15), 1824. https://doi.org/10.3390/polym18151824

Vancouver

Peñas-Caballero M, Delgado FR, Gregorio V, Cunha E, Ariño M, Bergaño Guzmán M, et al. Reuse of Uncured Carbon Fiber Prepreg Scrap via Calendering for Circular Composite Manufacturing. Polymers. 2026;18(15):1824. doi:10.3390/polym18151824

BibTeX
@article{PeasCaballero2026,
  author = {Peñas-Caballero, Mónica and Delgado, Fernando Ramos and Gregorio, Víctor and Cunha, Eunice and Ariño, María and Bergaño Guzmán, Martín and Salmerón Pérez, Noelia and Blanco Varela, Tamara and Fernández-Blázquez, Juan P and Casanova, Álvaro C},
  title = {Reuse of Uncured Carbon Fiber Prepreg Scrap via Calendering for Circular Composite Manufacturing},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {15},
  pages = {1824},
  doi = {10.3390/polym18151824}
}
Kostenlos starten →