EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mode-Dependent Strain-Rate Sensitivity of Filled Polymer Yield Under Shear and Uniaxial Deformation

Yancai Sun iD, Feng Shi, Jian Xu, Peiwu Hou, Wenjuan Bai iD, Dianming Chu iD, Wenzhong Deng iD

Polymers · 25.07.2026 · 18 (15) · 1823

DOI: 10.3390/polym18151823 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.07.2026. Verfasst von Yancai Sun und 6 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electrical Engineering, Guilin University of Aerospace Technology, Guilin 541004, China. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Academy of Sciences, Department of Science and Technology of Shandong Province, Guangxi Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Filled polymers yield differently under shear and uniaxial deformation, but filler and rate effects remain sparsely characterized. We study a glassy Kremer–Grest polymer with frozen filler beads at N=100, loading ϕ∈[0,0.30], and strain rate ε˙∈[10−4,10−2]τLJ−1 by non-equilibrium molecular dynamics. All ten strain-rate-sensitivity confidence intervals exclude zero (uniaxial m∈[0.17,0.30], shear m∈[0.14,0.16]). Uniaxial yield is more rate-sensitive than shear, but the mode gap is loading-dependent: Δm≈0.08–0.16 (p≥0.98) for ϕ≤0.10, attenuating to 0.02–0.04 for ϕ≥0.20 as filler loading increases. Frozen filler softens rather than reinforces (shear yield −78%, plateau modulus −43%); density-matched neat controls attribute most of the shear softening to density dilution (89–97%). At ϕ=0.30, shear develops a low-rate crossover and the yield ratio σyuniax/σyshear rises to [1.30,1.40], below the von-Mises reference. Density dilution dominates, but both-mode controls isolate a mode-selective filler contribution at ϕ=0.30 (resolved at the higher rate): 35–42% of the uniaxial versus ∼10% of the shear yield.

Schlagwörter

Stichwörter der Autor:innen

coarse-grained molecular dynamicsfiller de-reinforcementnon-equilibrium molecular dynamicspolymer nanocompositestrain-rate sensitivityyield stress

Autor:innen und Institutionen

  • College of Mechanical and Electrical Engineering, Guilin University of Aerospace Technology, Guilin 541004, China.
  • College of Mechanical and Electrical Engineering, Qingdao University of Science and Technology, Qingdao 266061, China.
  • University Engineering Research Center of Non-Standard Intelligent Equipment and Process Control Technology, Guangxi, Guilin 541004, China.
  • Academy of Aerospace Solid Propulsion Technology, Xi'an 710025, China.
  • Guilin Rubber Industry R&D Institute Co., Ltd., Guilin 541004, China.

ORCID-Profile: Yancai Sun, Wenjuan Bai, Dianming Chu, Wenzhong Deng

Förderung

  • Guangxi Academy of Sciences
  • Department of Science and Technology of Shandong Province
  • Guangxi Natural Science Foundation
  • Shandong Province Key R&D Program, Major Science and Technology Innovation Project

Zitieren

APA

Sun, Y., Shi, F., Xu, J., Hou, P., Bai, W., Chu, D., & Deng, W. (2026). Mode-Dependent Strain-Rate Sensitivity of Filled Polymer Yield Under Shear and Uniaxial Deformation. Polymers, 18(15), 1823. https://doi.org/10.3390/polym18151823

Vancouver

Sun Y, Shi F, Xu J, Hou P, Bai W, Chu D, et al. Mode-Dependent Strain-Rate Sensitivity of Filled Polymer Yield Under Shear and Uniaxial Deformation. Polymers. 2026;18(15):1823. doi:10.3390/polym18151823

BibTeX
@article{Sun2026,
  author = {Sun, Yancai and Shi, Feng and Xu, Jian and Hou, Peiwu and Bai, Wenjuan and Chu, Dianming and Deng, Wenzhong},
  title = {Mode-Dependent Strain-Rate Sensitivity of Filled Polymer Yield Under Shear and Uniaxial Deformation},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {15},
  pages = {1823},
  doi = {10.3390/polym18151823}
}
Kostenlos starten →