EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Numerical Investigation of the Dynamic Response of a Self-Adhesive Stiffened Polyimide Foam-Based Sandwich Structure Under Blast Loading

Yaru Sun iD, Chengyuan An iD, Bo Cheng, Yan Liu

Polymers · 23.07.2026 · 18 (15) · 1797

DOI: 10.3390/polym18151797 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 23.07.2026. Verfasst von Yaru Sun und 3 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Explosion Science and Safety Protection, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer-based sandwich structures have garnered significant interest as energy-absorbing protective materials. However, common damage modes in composite sandwich panels include matrix cracking, delamination, core crushing or core fracture, and debonding between the face sheets and the core. Among these, face–core debonding is one of the most prevalent failure mechanisms. This paper investigates a sandwich configuration designed to enhance blast resistance by incorporating a self-adhesive, stiffened polyimide foam (ASPI) into a steel–foam–steel architecture. The thermogravimetric analysis exhibits that ASPI foam obtained excellent thermal stability, and the residual mass retention at 800 °C was more than 36.2%. Experimental results show that at scaled distances of 1.077 m/kg1/3 and 1.292 m/kg1/3, the ASPI foam-based sandwich panels exhibited mid-span displacements as low as 8.5 mm and 6.7 mm, respectively. Under a scaled distance of 1.077 m/kg1/3, the mid-span displacement of the ASPI foam-based sandwich structure decreased from 15.0 mm to 8.5 mm, representing a 43.3% reduction compared with that of the neat polyimide foam-based sandwich structure. Moreover, compared with neat PI foam, the ASPI foam exhibited superior adhesion to steel face sheets, and no interfacial debonding was observed after blast loading. To further elucidate the underlying damage mechanisms under blast loading, a well-validated finite element model was developed and employed. Complementary scanning electron microscopy (SEM) analyses were conducted to examine the microstructural morphology of the ASPI foam core’s cross-section and surface after blast exposure. This study presents an investigation of a lightweight, self-adhesive, high-thermal stability, blast-resistant polymer-based composite foam.

Schlagwörter

Stichwörter der Autor:innen

blast resistancedamage mechanismself-adhesive foamstiffened polyimide foamthermal stability

Autor:innen und Institutionen

  • State Key Laboratory of Explosion Science and Safety Protection, Beijing Institute of Technology, Beijing 100081, China.
  • State Key Laboratory of Advanced Power Transmission Technology, China Electric Power Research Institute, Beijing 100081, China.

ORCID-Profile: Yaru Sun, Chengyuan An

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Sun, Y., An, C., Cheng, B., & Liu, Y. (2026). Experimental and Numerical Investigation of the Dynamic Response of a Self-Adhesive Stiffened Polyimide Foam-Based Sandwich Structure Under Blast Loading. Polymers, 18(15), 1797. https://doi.org/10.3390/polym18151797

Vancouver

Sun Y, An C, Cheng B, Liu Y. Experimental and Numerical Investigation of the Dynamic Response of a Self-Adhesive Stiffened Polyimide Foam-Based Sandwich Structure Under Blast Loading. Polymers. 2026;18(15):1797. doi:10.3390/polym18151797

BibTeX
@article{Sun2026,
  author = {Sun, Yaru and An, Chengyuan and Cheng, Bo and Liu, Yan},
  title = {Experimental and Numerical Investigation of the Dynamic Response of a Self-Adhesive Stiffened Polyimide Foam-Based Sandwich Structure Under Blast Loading},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {15},
  pages = {1797},
  doi = {10.3390/polym18151797}
}
Kostenlos starten →