EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mixing Workability of Polymer-Modified Asphalt Mixtures Based on Discrete Element Modeling

Yiqian Lin, Shanghui Li, Jinlong Huang, Zhenliang Jiang iD

Polymers · 22.07.2026 · 18 (14) · 1791

DOI: 10.3390/polym18141791 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 22.07.2026. Verfasst von Yiqian Lin und 3 weiteren Autor:innen. Beteiligte Einrichtung: College of Intelligent Construction, Fuzhou University of International Studies and Trade, Fuzhou 350202, China. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Workability of asphalt is crucial for pavement construction and quality assurance. The macroscopic and mesoscopic mixing workability of different base and polymer-modified asphalt mixtures was evaluated using a modified testing device and simulated by the three-dimensional discrete element method via the three-dimensional Particle Flow Code, respectively. The experimental results demonstrate that polymer-modified asphalt mixtures exhibited inferior mixing workability compared with base asphalt mixtures, consistent with their higher binder viscosity. The mixing workability decreased with the elevated nominal maximum aggregate size, and the open-graded mixtures showed inferior mixing ability compared with those of continuous and gap-graded mixtures. The sensitivity analysis demonstrates that temperature appeared to be the most significant influencing factor of the mixing workability, followed by gradation and asphalt binder type. The denser contact force chains of mixtures under lower temperatures observed by the numerical simulation provided evidence of the decreased mixing workability. The gradation appeared to only provide a path for load transfer without influencing the contact force properties. These findings provide a theoretical basis for understanding the mixing behaviors of asphalt mixtures.

Schlagwörter

Stichwörter der Autor:innen

PFC3Dmacroscopic and mesoscopic behaviorsmixing workabilitypolymer-modified asphalt mixturetemperature

Autor:innen und Institutionen

  • College of Intelligent Construction, Fuzhou University of International Studies and Trade, Fuzhou 350202, China.
  • College of Civil Engineering, Fuzhou University, Fuzhou 350108, China.
  • School of Transportation Science and Engineering, Harbin Institute of Technology, Harbin 150090, China.

ORCID-Profile: Zhenliang Jiang

Zitieren

APA

Lin, Y., Li, S., Huang, J., & Jiang, Z. (2026). Mixing Workability of Polymer-Modified Asphalt Mixtures Based on Discrete Element Modeling. Polymers, 18(14), 1791. https://doi.org/10.3390/polym18141791

Vancouver

Lin Y, Li S, Huang J, Jiang Z. Mixing Workability of Polymer-Modified Asphalt Mixtures Based on Discrete Element Modeling. Polymers. 2026;18(14):1791. doi:10.3390/polym18141791

BibTeX
@article{Lin2026,
  author = {Lin, Yiqian and Li, Shanghui and Huang, Jinlong and Jiang, Zhenliang},
  title = {Mixing Workability of Polymer-Modified Asphalt Mixtures Based on Discrete Element Modeling},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {14},
  pages = {1791},
  doi = {10.3390/polym18141791}
}
Kostenlos starten →