EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fast Pyrolysis of Deashed High-Urea-Formaldehyde Resin Biomass Waste for Platform Chemical and Carbonaceous Fuel

Xianfang Liao, Haolin Li, Zijie Li, Shuolin Deng, Ronghua Luo, Hang Wang, Qian Yu, Xingwei Yang, Anqing Zheng, Ke Jin iD, Guoqiang Lv

Polymers · 16.07.2026 · 18 (14) · 1745

DOI: 10.3390/polym18141745 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.07.2026. Verfasst von Xianfang Liao und 10 weiteren Autor:innen. Beteiligte Einrichtung: School of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Yunnan Province Students' Innovation and Entrepreneurship Training Program, Yunnan Fundamental Research Projects.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High ash andsss urea formaldehyde (UF) resin contents in particleboard sanding powder (SP) have restricted the effective resource utilization of SP and make it a hazardous biomass material for particleboard enterprises. To achieve high-value resource utilization of SP while addressing its hazardous disposal issues, different HCl concentration-oriented deashing pretreatments of SP coupled with fast pyrolysis was proposed for producing value-added pyrolytic sugar levoglucosan (LG) and high-quality pyrolytic char. The results show that H+ ions released from HCl solution could effectively remove structural ash, likely by disrupting the chemical linkages between the structural ash and lignocellulosic matrix. An amount of 2 mol/L HCl could achieve an over 95% removal rate of alkali and alkaline earth metals (AAEMs) in the ash while maintaining a low loss of polysaccharides. This considerably facilitated the glycosidic cleavage of cellulose into levoglucosan (LG), with the LG yield increasing from 2.18% of raw SP to 13.69% of 2 mol/L HCl deashed SP. Interestingly, it was found that HCl washing of SP facilitated the co-production of value-added platform chemical acetic acid via acid-catalyzed hydrolysis of acetyl groups in UF resin attached to the xylose unit, with the yield increasing from about 7% of raw SP to over 11% of HCl deashed one. Specifically, 2 mol/L HCl deashing pretreatment of SP significantly improved the quality of pyrolytic char with the ash content decreasing from 7.24% to 2.39% and fixed carbon content lifting from 54.08% to 76.04%, thus drastically improving the higher heating value (HHV) from 24.66% of raw SP-derived char to 30.05% of deashed SP-derived char. Moreover, the pyrolytic char CO2 gasification reactivity increased from 0.027 min−1 of raw SP-derived char to 0.034 min−1 of that derived from 2 mol/L HCl deashed SP, approaching that of the widely used industrial charcoal fuel. Pyrolysis kinetic analysis indicates that deashing pretreatment of SP makes the formation of value-added platform chemicals and high-quality carbonaceous fuel proceed more easily at a lower activation energy (214.39 kJ·mol−1) than that of raw SP (245.81 kJ·mol−1). This study offers a novel approach for the synergistic production of value-added chemicals and high-quality carbonaceous fuel from biomass waste materials with high contents of ash and UF resin, providing a feasible strategy for the clean and high-value resource utilization of wood-based industrial residues.

Schlagwörter

Stichwörter der Autor:innen

biomassdeashing pretreatmentfast pyrolysisparticleboard sanding powderpyrolytic charurea formaldehyde resin

Autor:innen und Institutionen

  • School of Metallurgical and Energy Engineering, Kunming University of Science and Technology, Kunming 650093, China.
  • State Key Laboratory of Complex Nonferrous Metal Resources Cleaning Utilization in Yunnan Province, Kunming 650093, China.
  • CAS Key Laboratory of Renewable Energy and Guangdong Key Laboratory of New and Renewable Energy Research and Development, Guangzhou Institute of Energy Conversion, Chinese Academy of Sciences, Guangzhou 510640, China.
  • School of Energy Science and Engineering, University of Science and Technology of China, Guangzhou 510640, China.
  • Sinopec Research Institute of Petroleum Processing, Beijing 100083, China.

ORCID-Profile: Ke Jin

Förderung

  • National Natural Science Foundation of China
  • Yunnan Province Students' Innovation and Entrepreneurship Training Program
  • Yunnan Fundamental Research Projects
  • Key Research and Development Program Project of Yunnan Provincial Department of Science and Technology
  • Yunnan Province Students’ Innovation and Entrepreneurship Training Program

Zitieren

APA

Liao, X., Li, H., Li, Z., Deng, S., Luo, R., Wang, H., Yu, Q., Yang, X., Zheng, A., Jin, K., & Lv, G. (2026). Fast Pyrolysis of Deashed High-Urea-Formaldehyde Resin Biomass Waste for Platform Chemical and Carbonaceous Fuel. Polymers, 18(14), 1745. https://doi.org/10.3390/polym18141745

Vancouver

Liao X, Li H, Li Z, Deng S, Luo R, Wang H, et al. Fast Pyrolysis of Deashed High-Urea-Formaldehyde Resin Biomass Waste for Platform Chemical and Carbonaceous Fuel. Polymers. 2026;18(14):1745. doi:10.3390/polym18141745

BibTeX
@article{Liao2026,
  author = {Liao, Xianfang and Li, Haolin and Li, Zijie and Deng, Shuolin and Luo, Ronghua and Wang, Hang and Yu, Qian and Yang, Xingwei and Zheng, Anqing and Jin, Ke and Lv, Guoqiang},
  title = {Fast Pyrolysis of Deashed High-Urea-Formaldehyde Resin Biomass Waste for Platform Chemical and Carbonaceous Fuel},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {14},
  pages = {1745},
  doi = {10.3390/polym18141745}
}
Kostenlos starten →