EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact Absorption Optimization in Rigid Polyurethane Foams Modified with Diethanolamine

Tatiana Francisco, Fabio Oliveira, Rosana Moreira iD, Elcio Cruz de Oliveira iD, Diego Souza iD

Polymers · 16.07.2026 · 18 (14) · 1741

DOI: 10.3390/polym18141741 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.07.2026. Verfasst von Tatiana Francisco und 4 weiteren Autor:innen. Beteiligte Einrichtung: Laboratório de Ensaios de Produtos (LAENP), National Institute of Technology (INT), Rio de Janeiro 20081-312, RJ, Brazil. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Brazilian agency CNPq, INT/IMA, the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brasil.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Rigid polyurethane foams are used in impact-attenuation systems due to their tunable cellular structure and energy dissipation capacity. However, expanded polystyrene (EPS), commonly used for impact protection, presents limitations related to impact attenuation performance and limited design flexibility. This study evaluates the impact performance of rigid polyurethane foams modified with diethanolamine and assesses formulation efficiency using Data Envelopment Analysis (DEA). Rigid PU foam formulations containing 0–3 wt% DEOA were synthesized and characterized by impact testing, apparent density measurements, Scanning Electron Microscopy, Fourier Transform Infrared Spectroscopy, and Thermogravimetric Analysis/Derivative Thermogravimetry. DEA was applied to correlate diethanolamine content with impact absorption efficiency. Excessive crosslinking and reduced energy dissipation were observed above 2 wt%, while concentrations below 0.5 wt% resulted in poorly structured foams. The formulation containing 1 wt% DEOA was identified as the most efficient among the investigated formulations, exhibiting the best overall performance, reducing transmitted peak acceleration by 13.8% compared with neat PU foam, while exhibiting an approximately 48% increase in apparent density, more complete consumption of NCO groups, a more uniform cellular structure, and only modest changes in thermal degradation behavior. These findings indicate that the improved impact performance is associated with the combined effects of increased apparent density, modified cellular morphology, and changes in the polyurethane network promoted by DEOA, underscore the promise of diethanolamine-modified rigid polyurethane (PU) foams for protective applications.

Schlagwörter

Stichwörter der Autor:innen

data envelopment analysisimpact attenuationrigid polyurethane foam

Autor:innen und Institutionen

  • Laboratório de Ensaios de Produtos (LAENP), National Institute of Technology (INT), Rio de Janeiro 20081-312, RJ, Brazil.
  • Institute of Macromolecules Professora Eloisa Mano (IMA), Federal University of Rio de Janeiro (UFRJ), Rio de Janeiro 21941-598, RJ, Brazil.
  • Postgraduate Programme in Metrology, Pontifical Catholic University of Rio de Janeiro, Rio de Janeiro22451-900, RJ, Brazil.

ORCID-Profile: Rosana Moreira, Elcio Cruz de Oliveira, Diego Souza

Förderung

  • Brazilian agency CNPq
  • INT/IMA
  • the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brasil
  • Empresa Brasileira de Pesquisa e Inovação Industrial

Zitieren

APA

Francisco, T., Oliveira, F., Moreira, R., Oliveira, E. C., & Souza, D. (2026). Impact Absorption Optimization in Rigid Polyurethane Foams Modified with Diethanolamine. Polymers, 18(14), 1741. https://doi.org/10.3390/polym18141741

Vancouver

Francisco T, Oliveira F, Moreira R, Oliveira EC, Souza D. Impact Absorption Optimization in Rigid Polyurethane Foams Modified with Diethanolamine. Polymers. 2026;18(14):1741. doi:10.3390/polym18141741

BibTeX
@article{Francisco2026,
  author = {Francisco, Tatiana and Oliveira, Fabio and Moreira, Rosana and Oliveira, Elcio Cruz de and Souza, Diego},
  title = {Impact Absorption Optimization in Rigid Polyurethane Foams Modified with Diethanolamine},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {14},
  pages = {1741},
  doi = {10.3390/polym18141741}
}
Kostenlos starten →