Influence of Additive Manufacturing Parameters and Surface Treatments on Wettability of VPP Acrylic Resins
Polymers · 15.07.2026 · 18 (14) · 1738
DOI: 10.3390/polym18141738 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 15.07.2026. Verfasst von María Jordá-Reolid und 4 weiteren Autor:innen. Beteiligte Einrichtung: AIJU Technological Centre, Avda. de la Industria, 03440 Ibi, Spain. Die Arbeit nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Generalitat Valenciana, Instituto Valenciano de Competitividad Empresarial, IVACE.
Abstract (Originalsprache)
There is a growing industrial interest in the development of functional plastic surfaces with hydrophobic and easy-to-clean properties, particularly in manufacturing sectors where safety, hygiene, and durability are critical requirements. This work investigates the development of hydrophobic and superhydrophobic surfaces on acrylic resin components fabricated by vat photopolymerisation (VPP), using a high-performance Rigid 10K photopolymer. The influence of manufacturing parameters, namely layer thickness and build orientation, on initial wettability was first evaluated, showing that orientation plays a more relevant role than layer thickness in controlling the water contact angle. Subsequently, different surface modification strategies were explored, including femtosecond laser microtexturing, sandblasting, and physical vapour deposition (PVD) coatings. Preliminary results indicate that femtosecond laser texturing enables controlled modification of surface roughness and wettability, with strong dependence on laser fluence and pitch. Sandblasting significantly increases surface roughness, promoting hydrophobic behaviour through the generation of irregular topographies. In contrast, PVD coatings appear to modify wettability primarily through surface chemistry. Roughness analysis suggests that, although layer thickness governs the initial surface condition, post-processing treatments progressively dominate the final surface morphology. Ongoing work is focused on fully correlating roughness parameters, surface morphology, and wettability performance. Overall, the combination of VPP and tailored surface treatments presents a promising approach for functionalising polymeric surfaces for advanced engineering applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- AIJU Technological Centre, Avda. de la Industria, 03440 Ibi, Spain.
- Technological Institute of Materials (ITM), Universitat Politècnica de València (UPV), Plaza Ferrándiz y Carbonell 1, 03801 Alcoy, Spain.
ORCID-Profile: Ivan Dominguez-Candela, Mirko Kunowsky, Ignacio Sandoval-Pérez, Asunción Martínez-García
Förderung
- Generalitat Valenciana
- Instituto Valenciano de Competitividad Empresarial
- IVACE
Zitieren
APA
Jordá-Reolid, M., Dominguez-Candela, I., Kunowsky, M., Sandoval-Pérez, I., & Martínez-García, A. (2026). Influence of Additive Manufacturing Parameters and Surface Treatments on Wettability of VPP Acrylic Resins. Polymers, 18(14), 1738. https://doi.org/10.3390/polym18141738
Vancouver
Jordá-Reolid M, Dominguez-Candela I, Kunowsky M, Sandoval-Pérez I, Martínez-García A. Influence of Additive Manufacturing Parameters and Surface Treatments on Wettability of VPP Acrylic Resins. Polymers. 2026;18(14):1738. doi:10.3390/polym18141738
BibTeX
@article{JordReolid2026,
author = {Jordá-Reolid, María and Dominguez-Candela, Ivan and Kunowsky, Mirko and Sandoval-Pérez, Ignacio and Martínez-García, Asunción},
title = {Influence of Additive Manufacturing Parameters and Surface Treatments on Wettability of VPP Acrylic Resins},
journal = {Polymers},
year = {2026},
volume = {18},
number = {14},
pages = {1738},
doi = {10.3390/polym18141738}
}
EUVIMED