EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Flexible Intumescent Roll-Form Fire Protection for Enhancing the Fire Resistance Ratings of Building Structures

Marina Gravit iD, Vasily Prusakov, Olga Zybina, Muhammad Mudassar Chishti iD, Irina Kotlyarskaya, Maxim Sychov

Polymers · 15.07.2026 · 18 (14) · 1736

DOI: 10.3390/polym18141736 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 15.07.2026. Verfasst von Marina Gravit und 5 weiteren Autor:innen. Beteiligte Einrichtung: Civil Engineering Institute, Peter the Great Saint-Petersburg Polytechnic University, Polytechnicheskaya, 29 B, 195251 Saint-Petersburg, Russia. Die Arbeit nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education of the Russian Federation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Intumescent coatings are widely used to enhance the fire resistance of structural steel. In contrast to traditional fire protection methods, this novel flexible intumescent protection offers several key advantages: universal compatibility with other coatings (via non-contact wrapping), resistance to extreme temperatures (−60 °C to +90 °C), all-weather usability, and suitability for light-gauge cold-formed thin-walled steel structures. This paper describes the development and investigation of these fire-protective, flexible intumescent coatings based on eco-friendly binders (silicone polymers and acrylic resins) with varying intercalated graphite (IG) content from 0% to 40%. An IG content of 25–40% enables a steel I-section with a section factor of 294 mm−1 to reach its limit state at 44 min (compared to 15 min for unprotected steel). Fire tests on steel beams with a section factor of 172 mm−1 demonstrated that samples reached the deflection limit state at the 64th and 66th minutes, respectively. Thermogravimetric analysis (TGA) was used to determine the temperature ranges for the thermal decomposition and expansion of the IG. Mechanical property studies revealed the influence of IG on the elastic modulus and tensile strength. Accelerated climatic testing in moderately cold conditions and salt spray chamber tests confirmed that the intumescent roll coating has no negative impact on the steel substrates.

Schlagwörter

Stichwörter der Autor:innen

building structuresfire protectionfire resistanceintumescent coatingsintumescent flexible coatingsswelling materials

Autor:innen und Institutionen

  • Civil Engineering Institute, Peter the Great Saint-Petersburg Polytechnic University, Polytechnicheskaya, 29 B, 195251 Saint-Petersburg, Russia.
  • LLC "RPC PROMIZOL" St. Barclay 6c3, Office 7.05, 121087 Moscow, Russia.
  • School of Advanced Engineering Studies of Digital Engineering, Peter the Great Saint-Petersburg Polytechnic University, Polytechnicheskaya, 29 B, 195251 Saint-Petersburg, Russia.
  • I.V. Grebenshikov Institute of Silicate Chemistry, 199034 Saint-Petersburg, Russia.

ORCID-Profile: Marina Gravit, Muhammad Mudassar Chishti

Förderung

  • Ministry of Science and Higher Education of the Russian Federation

Zitieren

APA

Gravit, M., Prusakov, V., Zybina, O., Chishti, M. M., Kotlyarskaya, I., & Sychov, M. (2026). Flexible Intumescent Roll-Form Fire Protection for Enhancing the Fire Resistance Ratings of Building Structures. Polymers, 18(14), 1736. https://doi.org/10.3390/polym18141736

Vancouver

Gravit M, Prusakov V, Zybina O, Chishti MM, Kotlyarskaya I, Sychov M. Flexible Intumescent Roll-Form Fire Protection for Enhancing the Fire Resistance Ratings of Building Structures. Polymers. 2026;18(14):1736. doi:10.3390/polym18141736

BibTeX
@article{Gravit2026,
  author = {Gravit, Marina and Prusakov, Vasily and Zybina, Olga and Chishti, Muhammad Mudassar and Kotlyarskaya, Irina and Sychov, Maxim},
  title = {Flexible Intumescent Roll-Form Fire Protection for Enhancing the Fire Resistance Ratings of Building Structures},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {14},
  pages = {1736},
  doi = {10.3390/polym18141736}
}
Kostenlos starten →