EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

3D-Printed PLA Filaments Reinforced with Durian (Durio zibethinus) Husk-Derived Carboxymethyl Cellulose for Methylene Blue Removal

Kawisara Sirichaicharoenkol, Anchan Khankhuean, Weekit Sirisaksoontorn iD, Chainarong Sakulthaew iD, Ut Dong Thach iD, Philip Anggo Krisbiantoro, Kevin C-W Wu iD, Chih-Feng Huang iD, Tongsai Jamnongkan iD

Polymers · 11.07.2026 · 18 (14) · 1707

DOI: 10.3390/polym18141707 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 11.07.2026. Verfasst von Kawisara Sirichaicharoenkol und 8 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Faculty of Science, Kasetsart University, Bangkok 10900, Thailand. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Kasetsart University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Although polylactic acid (PLA) filaments are currently the leading biodegradable polymer in three-dimensional (3D) printing due to their excellent printability, good mechanical properties, and environmental friendliness, they possess low thermal resistance and limited flexibility, which restricts their use in applications requiring enhanced material performance. PLA filaments were reinforced with carboxymethyl cellulose (CMC) derived from durian husk using a single-screw extrusion technique to produce PLA/CMC filaments. CMC was obtained via carboxymethylation of durian husk-derived cellulose using monochloroacetic acid (MCA) in the presence of NaOH. The incorporation of CMC improved the thermal and mechanical properties of the PLA filaments. The presence of carboxylate (–COO–) groups from CMC makes the filaments promising as an adsorbent for a dye pollutant, namely, methylene blue (MB). Adsorption tests showed that the performance of PLA/CMC filaments for MB removal was influenced by the CMC loading, with 0.1 wt.% CMC (PLA/CMC-30 (0.1)) being the optimal one for achieving a higher adsorption rate. Over the filaments, the removal of MB followed a pseudo-first-order kinetic model, with a k1 of 0.020 min−1. Overall, this work demonstrates that PLA/CMC filaments derived from agricultural waste offer a sustainable and multifunctional material with enhanced performance for environmental remediation applications.

Schlagwörter

Stichwörter der Autor:innen

3D printingadsorptionbiocompositecarboxymethyl cellulosedurian huskmethylene bluepolylactic acid

Autor:innen und Institutionen

  • Department of Chemistry, Faculty of Science, Kasetsart University, Bangkok 10900, Thailand.
  • Department of Fundamental Science and Physical Education, Faculty of Science at Sriracha, Kasetsart University, Chonburi 20230, Thailand.
  • Department of Veterinary Nursing, Faculty of Veterinary Technology, Kasetsart University, Bangkok 10900, Thailand.
  • Research Group in Pharmaceutical and Biomedical Sciences, Faculty of Pharmacy, Ton Duc Thang University, Ho Chi Minh City 700000, Vietnam.
  • Department of Applied Chemistry, Graduate School of Engineering, Tohoku University, Sendai 980-8579, Japan.
  • Department of Chemical Engineering, National Taiwan University, Taipei 10617, Taiwan.

ORCID-Profile: Weekit Sirisaksoontorn, Chainarong Sakulthaew, Ut Dong Thach, Kevin C-W Wu, Chih-Feng Huang, Tongsai Jamnongkan

Förderung

  • Kasetsart University

Zitieren

APA

Sirichaicharoenkol, K., Khankhuean, A., Sirisaksoontorn, W., Sakulthaew, C., Thach, U. D., Krisbiantoro, P. A., Wu, K. C., Huang, C. F., & Jamnongkan, T. (2026). 3D-Printed PLA Filaments Reinforced with Durian (Durio zibethinus) Husk-Derived Carboxymethyl Cellulose for Methylene Blue Removal. Polymers, 18(14), 1707. https://doi.org/10.3390/polym18141707

Vancouver

Sirichaicharoenkol K, Khankhuean A, Sirisaksoontorn W, Sakulthaew C, Thach UD, Krisbiantoro PA, et al. 3D-Printed PLA Filaments Reinforced with Durian (Durio zibethinus) Husk-Derived Carboxymethyl Cellulose for Methylene Blue Removal. Polymers. 2026;18(14):1707. doi:10.3390/polym18141707

BibTeX
@article{Sirichaicharoenkol2026,
  author = {Sirichaicharoenkol, Kawisara and Khankhuean, Anchan and Sirisaksoontorn, Weekit and Sakulthaew, Chainarong and Thach, Ut Dong and Krisbiantoro, Philip Anggo and Wu, Kevin C-W and Huang, Chih-Feng and Jamnongkan, Tongsai},
  title = {3D-Printed PLA Filaments Reinforced with Durian (Durio zibethinus) Husk-Derived Carboxymethyl Cellulose for Methylene Blue Removal},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {14},
  pages = {1707},
  doi = {10.3390/polym18141707}
}
Kostenlos starten →