EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sustainable Poly(3-hydroxybutyrate) Bioplastic Production by Extremely Halophilic Haloarcula sp. PLQ Isolated from Qatari Extreme Environments

Manel Ben Abdallah, Imen Saadaoui iD, Touria Bounnit iD, Ghamza Al-Ghasal, Mahmoud Thaher, Mohammad A Al-Ghouti iD, Nabil Zouari iD, Helmi Hamdi iD, Mohamed Chamkha iD, Sami Sayadi iD

Polymers · 09.07.2026 · 18 (14) · 1693

DOI: 10.3390/polym18141693 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.07.2026. Verfasst von Manel Ben Abdallah und 9 weiteren Autor:innen. Beteiligte Einrichtung: Biotechnology Program, Center for Sustainable Development, College of Arts and Sciences, Qatar University, Doha 2713, Qatar. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Qatar University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the increase in Qatar’s population, the generation of plastic waste has grown, resulting in high levels of environmental pollution. Polyhydroxyalkanoates are sustainable bio-alternatives to petrochemical plastics. Despite their market potential, the industrial implementation of PHAs is still limited. This study aimed to develop sustainable processes for PHA accumulation by screening and isolating novel haloarchaeal strains from Qatari extreme environments with the ability to convert carbon sources to PHAs. In total, 24 positive haloarchaeal members, belonging to Natrinema, Haloarcula, and Halostagnicola genera, were identified for the first time in Qatari ecosystems through 16S rRNA and phaC/phaE gene sequence analyses. Among them, the promising PHA-producing archaeon Haloarcula sp. PLQ exhibited the highest production, reaching a PHB concentration of 496 ± 24 mg L−1 and a cell dry weight of 1109.8 ± 58.6 mg L−1, corresponding to a maximum yield of 44.69 wt % ± 2.13 under optimal conditions. Polymer characterization confirmed the production of poly(3-hydroxybutyrate). In addition, the thermal properties analyzed by TGA (Tonset = 250 °C; Td = 270 °C) and DSC (Tm = 169 °C) confirmed a PHB-like film with thermal behavior comparable to standard PHB. Therefore, future pilot-scale studies on the pure culture of a promising strain for PHA production from renewable feedstocks under non-sterile, batch, or continuous fermentation will be conducted.

Schlagwörter

Stichwörter der Autor:innen

PHB-producing haloarchaeaQatari extreme environmentsbiodegradable plasticspoly(3-hydroxybutyrate)polyhydroxyalkanoaterenewable resources

Autor:innen und Institutionen

  • Biotechnology Program, Center for Sustainable Development, College of Arts and Sciences, Qatar University, Doha 2713, Qatar.
  • Laboratory of Environmental Bioprocesses, Centre of Biotechnology of Sfax, P.O. Box 1177, Sfax 3018, Tunisia.
  • Environmental Sciences Program, Department of Biological and Environmental Sciences, College of Arts and Sciences, Qatar University, Doha 2713, Qatar.

ORCID-Profile: Imen Saadaoui, Touria Bounnit, Mohammad A Al-Ghouti, Nabil Zouari, Helmi Hamdi, Mohamed Chamkha, Sami Sayadi

Förderung

  • Qatar University

Zitieren

APA

Ben Abdallah, M., Saadaoui, I., Bounnit, T., Al-Ghasal, G., Thaher, M., Al-Ghouti, M. A., Zouari, N., Hamdi, H., Chamkha, M., & Sayadi, S. (2026). Sustainable Poly(3-hydroxybutyrate) Bioplastic Production by Extremely Halophilic Haloarcula sp. PLQ Isolated from Qatari Extreme Environments. Polymers, 18(14), 1693. https://doi.org/10.3390/polym18141693

Vancouver

Ben Abdallah M, Saadaoui I, Bounnit T, Al-Ghasal G, Thaher M, Al-Ghouti MA, et al. Sustainable Poly(3-hydroxybutyrate) Bioplastic Production by Extremely Halophilic Haloarcula sp. PLQ Isolated from Qatari Extreme Environments. Polymers. 2026;18(14):1693. doi:10.3390/polym18141693

BibTeX
@article{BenAbdallah2026,
  author = {Ben Abdallah, Manel and Saadaoui, Imen and Bounnit, Touria and Al-Ghasal, Ghamza and Thaher, Mahmoud and Al-Ghouti, Mohammad A and Zouari, Nabil and Hamdi, Helmi and Chamkha, Mohamed and Sayadi, Sami},
  title = {Sustainable Poly(3-hydroxybutyrate) Bioplastic Production by Extremely Halophilic Haloarcula sp. PLQ Isolated from Qatari Extreme Environments},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {14},
  pages = {1693},
  doi = {10.3390/polym18141693}
}
Kostenlos starten →