EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Flexible Polymer-Stabilized Liquid Crystal Films Based on Radical-Promoted Cationic Co-Polymerization of Epoxy Monomers for Smart Windows

Bingxuan Wang, Tianfu Zhou, Jiayu Li, Yingjie Shi, Meiqi Yang, Yuxin Qian, Yanzi Gao iD, Meina Yu iD, Cheng Zou, Yuanwei Chen, Huai Yang iD

Polymers · 07.07.2026 · 18 (13) · 1675

DOI: 10.3390/polym18131675 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 07.07.2026. Verfasst von Bingxuan Wang und 10 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer-stabilized liquid crystal (PSLC) films are promising for smart window applications because of their transparent-to-scattering switching behavior. However, conventional acrylate-based PSLC films often suffer from poor mechanical robustness and weak interfacial adhesion, limiting their use in flexible devices. Herein, epoxy-based PSLC films have been prepared through radical-promoted cationic photopolymerization using a difunctional epoxy monomer, E6M, and a series of liquid-crystalline monoepoxy monomers, E-nOCB. The effects of alkyl chain parity, chain length, and E6M/E-10OCB ratio on polymer morphology, electro-optical behavior, and peel strength were systematically investigated. Even-numbered E-nOCB monomers favored the formation of regular columnar polymer structures and improved optical contrast, whereas odd-numbered monomers produced more disordered networks with higher peel strength. Among them, the sample prepared with E-10OCB showed a better balance between electro-optical performance and mechanical adhesion. At a fixed total polymer content of 15 wt%, optimizing the E6M/E-10OCB ratio enabled the sample doped with E-10OCB to achieve the highest contrast ratio of 160.91 while increasing the peel strength from 47.28 to 55.69 kPa compared with the sample without E-10nOCB. These results demonstrate that regulating monoepoxy/diepoxy composition and alkyl chain structure is an effective strategy for improving the overall performance of epoxy-based PSLC films for smart windows.

Schlagwörter

Stichwörter der Autor:innen

electro-optical propertiesepoxy resinpeel strengthpolymer-stabilized liquid crystalssmart windows

Autor:innen und Institutionen

  • Institute for Advanced Materials and Technology, University of Science and Technology Beijing, Beijing 100083, China.
  • School of Materials Science and Engineering, Peking University, Beijing 100083, China.

ORCID-Profile: Yanzi Gao, Meina Yu, Huai Yang

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Wang, B., Zhou, T., Li, J., Shi, Y., Yang, M., Qian, Y., Gao, Y., Yu, M., Zou, C., Chen, Y., & Yang, H. (2026). Flexible Polymer-Stabilized Liquid Crystal Films Based on Radical-Promoted Cationic Co-Polymerization of Epoxy Monomers for Smart Windows. Polymers, 18(13), 1675. https://doi.org/10.3390/polym18131675

Vancouver

Wang B, Zhou T, Li J, Shi Y, Yang M, Qian Y, et al. Flexible Polymer-Stabilized Liquid Crystal Films Based on Radical-Promoted Cationic Co-Polymerization of Epoxy Monomers for Smart Windows. Polymers. 2026;18(13):1675. doi:10.3390/polym18131675

BibTeX
@article{Wang2026,
  author = {Wang, Bingxuan and Zhou, Tianfu and Li, Jiayu and Shi, Yingjie and Yang, Meiqi and Qian, Yuxin and Gao, Yanzi and Yu, Meina and Zou, Cheng and Chen, Yuanwei and Yang, Huai},
  title = {Flexible Polymer-Stabilized Liquid Crystal Films Based on Radical-Promoted Cationic Co-Polymerization of Epoxy Monomers for Smart Windows},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {13},
  pages = {1675},
  doi = {10.3390/polym18131675}
}
Kostenlos starten →