A Multi-Physics Modeling Framework for Optimizing Spreading and Sintering Parameters in Powder Bed Fusion
Polymers · 04.07.2026 · 18 (13) · 1663
DOI: 10.3390/polym18131663 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 04.07.2026. Verfasst von Jiang Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: Xi'an Institute of Applied Optics, Reconnaissance Vehicle Research and Development Center, Xi'an 710065, China. Die Arbeit nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Powder Bed Fusion-Laser Beam/Polymer (PBF-LB/P) is a key additive manufacturing technology widely used in aerospace, but its process parameters are difficult to optimize for thermoplastic composites due to poor powder flowability and unstable melting regions. To address this challenge, this paper develops discrete element and finite element models to systematically determine the PBF process window for both powder spreading and sintering stages, with verified reliability. In the spreading stage, the powder layer performance is evaluated through surface profile, density, and uniformity. The effects of reinforcement phase, spreading speed, and layer thickness are analyzed, establishing reasonable spreading parameter windows. It is found that the optimal layer thickness for PEEK powder is determined to be 0.13 mm, while that for PEEK/CF composite powder is 0.12 mm. At the optimal layer thickness, the powder bed exhibits desirable properties, which minimize its adverse influence on the sintering process and serve as a prerequisite for subsequently establishing the sintering process window. For the sintering stage, sufficient sintering constraint criteria are established, and a systematic determination method is proposed. By analyzing microscopic sintering mechanisms and characterizing the effects of laser power, scanning speed, and hatching space on melt pool dimensions and temperature, a reasonable sintering process window can be efficiently determined. It is found that within the process window, the PEEK specimens achieved a maximum relative density of 99.31% and exhibited a tensile strength 13.1% higher than that of specimens processed outside the window, demonstrating a clear superiority.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Xi'an Institute of Applied Optics, Reconnaissance Vehicle Research and Development Center, Xi'an 710065, China.
- Xi'an Modern Control Technology Research Institute, Xi'an 710061, China.
- School of Mechanical Engineering, Northwestern Polytechnical University, Xi'an 710072, China.
ORCID-Profile: Xujiang Chao
Zitieren
APA
Li, J., Peng, F., Zhao, J., Chai, X., Fu, J., Li, S., & Chao, X. (2026). A Multi-Physics Modeling Framework for Optimizing Spreading and Sintering Parameters in Powder Bed Fusion. Polymers, 18(13), 1663. https://doi.org/10.3390/polym18131663
Vancouver
Li J, Peng F, Zhao J, Chai X, Fu J, Li S, et al. A Multi-Physics Modeling Framework for Optimizing Spreading and Sintering Parameters in Powder Bed Fusion. Polymers. 2026;18(13):1663. doi:10.3390/polym18131663
BibTeX
@article{Li2026,
author = {Li, Jiang and Peng, Fulun and Zhao, Jianzhao and Chai, Xinliang and Fu, Junjie and Li, Shaoying and Chao, Xujiang},
title = {A Multi-Physics Modeling Framework for Optimizing Spreading and Sintering Parameters in Powder Bed Fusion},
journal = {Polymers},
year = {2026},
volume = {18},
number = {13},
pages = {1663},
doi = {10.3390/polym18131663}
}
EUVIMED